Difference between revisions of "Broadband Platform"
Latest revision as of 18:43, 23 September 2022
The Southern California Earthquake Center (SCEC) Broadband Platform (BBP) is a software system that can generate 0-20+ Hz seismograms for historical and scenario earthquakes in California, Eastern North America, and Japan using several alternative computational methods.
The current release of the SCEC Broadband Platform software is available for download from:
- Broadband Platform v22.4.0 Software Source Code Repository
- Broadband Platform Wiki-based Documentation
This version was released in May 2022. BBP v22.4 includes several new capabilities. Details of the new features and capabilities of BBP v22.4 are described in the BBP v22.4 release notes. We recommend that all new users work with BBP v22.4 because this version adds new capabilities and improvements to the methods provided in earlier releases of the Broadband Platform. We recommend existing Broadband platform users migrate to BBP v22.4 whenever possible. Previous versions of the Broadband Platform will remain available for users that want to reproduce results produced with earlier versions of the Platform. Please review the BBP installation instructions for details on how to download and install BBP v22.4 on your local computer.
The goal of the SCEC Broadband Simulation Platform is to generate broadband (0-20+ Hz) ground motions for earthquakes. The SCEC Broadband Platform is a collaborative software development project involving SCEC researchers, research engineers, graduate students, and the SCEC/CME software development group. SCEC scientific groups have contributed modules to the Broadband Platform including kinematic rupture generation, low- and high-frequency seismogram synthesis using 3D wave propagation through 1D layered velocity structures, non-linear site effects, ground motion intensity measure calculations, and visualization. These complex scientific codes have been integrated into a system that supports easy on-demand computation of broadband seismograms, providing user-defined, repeatable calculation of ground-motion seismograms, using alternative simulation methods, and software utilities to generate tables, plots, and maps. The SCEC Broadband Platform is designed to be used by both scientific and engineering researchers with some experience interpreting ground motion simulations.
Users may calculate broadband seismograms for both historical earthquakes (validation events including Northridge, Loma Prieta, etc.) and user-defined earthquakes. The platform produces a variety of data products, including broadband seismograms, rupture visualizations, and several goodness-of-fit plots. When running a validation event, users supply their own simple source description, or provide a rupture description in SRF format. Users may specify their own list of stations or use a provided list.
The SCEC BBP software can be compiled and run on recent Linux systems with GNU compilers. The Broadband Platform continues to evolve, and new versions of the BBP are released periodically on GitHub. The latest release includes seven simulation methods, eight simulation regions covering California, Japan, Eastern North America, and the ability to compare simulation results against empirical ground motion models. The newest features include the ability to simulate multi-segment ruptures using several simulation methods. And, in addition to a new simulation method, it now includes improvements to several existing ground motion simulation methods and revised Green’s functions for all simulation regions. In this release, the site response module is integrated with all simulation methods and can also be used for comparing simulated data against historical earthquakes
The Broadband Platform is open-source software that is made available under the terms of the BSD-3 License. A copy of the License can be found with the software in the 'LICENSE' file in the GitHub repository.
For assistance with the Broadband Platform, you may
- Email software @ scec.org with specific questions
- Browse and submit new trouble tickets, or feature requests, at Broadband Issues Page.
Broadband Platform Developers and Collaborators
- San Diego State University Dept of Geological Sciences
- U.C. Santa Barbara Dept of Earth Sciences
- UCSB Institute for Crustal Studies
- University of Nevada Reno
- University of Western Ontario
- ETH Zurich - Swiss Federal Institute of Technology Zurich
- USGS Earthquake Hazards Program including Pasadena California
- University of California, Berkeley
- Pacific Earthquake Engineering Research Center
- Korea Institute of Geoscience and Mineral Resources (KIGAM)
- Lawrence Livermore National Laboratory
- Center for Integrated Disaster Information Research, University of Tokyo, Japan
- Aichi Institute of Technology, Japan
- National Research Institute for Earth Sciences and Disaster Resilience, Tsukuba, Japan
Supporting Presentation Materials
- Broadband Platform Description - 2017 (pptx, 1.6 MB)
- California Map Showing Suggested Approximate Regions for GFs (PDF, 133KB)
- Broadband Poster from SSA 2019 (PDF, 14MB)
- Broadband Platform 16.5.0 Release Overview (PDF, 1.9 MB)
- Broadband Platform Description - 2015 (pptx, 3.9 MB)
Frequently Asked Questions (FAQ)
We post BBP user questions and our response to a Broadband Platform Frequently Asked Questions (FAQ) page:
Related Wiki Entries
Older Broadband Platform Releases
Earlier version of the broadband platform software and data distributions are provided to support existing Broadband platform users. However, we recommend all users upgrade to the most recent version at first opportunity. Earlier releases can be found in the Broadband Platform Previous Releases page.
Please support the Broadband Platform project by acknowledging the use of this software in your presentations and publications. Acknowledgements and citations help us obtain additional resources for continued development of the platform. If you use the Broadband Platform software for work resulting in an academic publication, we would appreciate it if one, or more, of the following paper is cited.
The primary reference for the Broadband Platform software system is:
- Maechling, P. J., F. Silva, S. Callaghan, and T. H. Jordan (2015). SCEC Broadband Platform: System Architecture and Software Implementation, Seismol. Res. Lett., 86, no. 1, doi: 10.1785/0220140125.
References for specific computational methods included in the Broadband Platform and for the validation procedures developed by the Broadband Platform include:
- Goulet, C.A., Abrahamson, N.A., Somerville, P.G. and K, E. Wooddell (2015) The SCEC Broadband Platform Validation Exercise: Methodology for Code Validation in the Context of Seismic-Hazard Analyses, Seismol. Res. Lett., 86, no. 1, doi: 10.1785/0220140104
- Dreger, D. S., Beroza, G.C., Day, S. M., Goulet, C. A., Jordan, T. H., Spudich, P. A., and Stewart, J. P. (2015). Validation of the SCEC Broadband Platform V14.3 Simulation Methods Using Pseudospectral Acceleration Data, Seismol. Res. Lett., 86, no. 1, doi:10.1785/0220140118.
- Anderson, J. G (2015) The Composite Source Model for Broadband Simulations of Strong Ground Motions Seismological Research Letters, January/February 2015, v. 86, p. 68-74, First published on December 17, 2014, doi:10.1785/0220140098
- Atkinson, G. M., and Assatourians, K. (2015) Implementation and Validation of EXSIM (A Stochastic Finite‐Fault Ground‐Motion Simulation Algorithm) on the SCEC Broadband Platform Seismological Research Letters, January/February 2015, v. 86, p. 48-60, First published on December 17, 2014, doi:10.1785/0220140097
- Crempien, J. G. F., and Archuleta, R. J. (2015) UCSB Method for Simulation of Broadband Ground Motion from Kinematic Earthquake Sources Seismological Research Letters, January/February 2015, v. 86, p. 61-67, First published on December 17, 2014, doi:10.1785/0220140103
- Dreger, D. S., and Jordan, T. H. (2015) Introduction to the Focus Section on Validation of the SCEC Broadband Platform V14.3 Simulation Methods Seismological Research Letters, January/February 2015, v. 86, p. 15-16, doi:10.1785/0220140233
- Graves, R., and Pitarka, A. (2015) Refinements to the Graves and Pitarka (2010) Broadband Ground‐Motion Simulation Method Seismological Research Letters, January/February 2015, v. 86, p. 75-80, First published on December 17, 2014, doi:10.1785/0220140101
- Olsen, K. B., and Takedatsu, R. (2015) The SDSU Broadband Ground‐Motion Generation Module BBtoolbox Version 1.5 Seismological Research Letters, January/February 2015, v. 86, p. 81-88, First published on December 17, 2014, doi:10.1785/0220140102
- Song, S.G. (2016) Developing a generalized pseudo-dynamic source model of Mw 6.5-7.0 to simulate strong ground motions, Geophysical Journal International, 204, 1254-1265. doi: 10.1093/gji/ggv521
- Song, S.G., Dalguer, L.A. and Mai, P.M. (2014) Pseudo-dynamic source modeling with 1-point and 2-point statistics of earthquake source parameters, Geophysical Journal International, 196, 1770-1786. doi: 10.1093/gji/ggt479
The site response method written by RWGraves, included in the BBP, is based on this reference:
- Stewart J.P., D.M. Boore, E. Seyhan, and G.M. Atkinson (2016). NGA-West2 equations for predicting vertical-component PGA, PGV, and 5%-damped PSA from shallow crustal earthquakes. Earthq. Spectra, 32 (2): 1005–1031.