UCVM cca/cvms5 comparing builtin-gtl vs elygtl:ely

CVM-S4.26.M01(cvmsi) & embedded GTL code

The GTL related flags and their default setting in cvmsi src code,

• ADD_ALT_GTL (set to 0)
• ADD_ROB_GTL (set to 0)
• ADD_TJ_GTL (set to 1)

• ADD_GTL (set to 0)

cvmsi has embedded gtl code but not turned on by default. ADD_GTL flag needs to be set to 1 in src/cvmsi.c, recompile and the new libcvmsi.so reinstalled. It can also accept external elygtl post processing.

plots

File:Cvmsi alt z1.png alt Z1.0

File:Cvmsi rob z1.png rob Z1.0

tj Z1.0

File:Cvmsi none z1.png none Z1.0

File:Cvmsi alt gtl z1.png alt gtl Z1.0

File:Cvmsi rob gtl z1.png rob gtl Z1.0

File:Cvmsi tj gtl z1.png tj gtl Z1.0

File:Cvmsi none gtl z1.png tj gtl Z1.0

Using stock cvmsi (which is with ADD_TJ enable) and elygtl,

File:Cvmsi tj elygtl z1.png tj elygtl Z1.0

raw data CCA and gtl = CCA has a gtl on/off flag in the data/config file. It can also use external elygtl post processing. original Z1.0 gtl Z1.0 elygtl Z1.0 original Z2.5 gtl Z2.5 elygtl Z2.5 CVM-S4.26(cvms5) and gtl = cvms5 has a gtl on/off flag in the data/config file. It can also use external elygtl post processing. original Z1.0 gtl Z1.0 elygtl Z1.0 original Z2.5 gtl Z2.5 elygtl Z2.5 Related Links UCVM