CyberShake Study 18.8

CyberShake 18.3 is a computational study to perform CyberShake in a new region, the extended Bay Area. We plan to use a combination of 3D models (USGS Bay Area detailed and regional, CVM-S4.26.M01, CCA-06) with a minimum Vs of 500 m/s and a frequency of 1 Hz. We will use the GPU implementation of AWP-ODC-SGT, the Graves & Pitarka (2014) rupture variations with 200m spacing and uniform hypocenters, and the UCERF2 ERF. The SGT and post-processing calculations will both be run on both NCSA Blue Waters and OLCF Titan.

Status

This study is under development. We hope to begin in March 2018.

Science Goals

The science goals for this study are:

• Expand CyberShake to the Bay Area.
• Calculate CyberShake results with the USGS Bay Area velocity model as the primary model.

Technical Goals

• Perform the largest CyberShake study to date.

Sites

Map showing Study 18.3 sites (cities=yellow, CISN stations=orange, missions=blue, 10 km grid=purple, 5 km grid=green, PG&E locations=pink. The Bay Area box is in orange and the Study 17.3 box is in magenta.

The Study 18.3 box is 180 x 390 km, with the long edge rotated 27 degrees counter-clockwise from vertical. The corners are defined to be:

South: (-121.51,35.52)
West: (-123.48,38.66)
North: (-121.62,39.39)
East: (-119.71,36.22)

We are planning to run 869 sites, 838 of which are new, as part of this study.

These sites include:

• 77 cities (74 new)
• 10 new missions
• 139 CISN stations (136 new)
• 46 new sites of interest to PG&E
• 597 sites along a 10 km grid (571 new)

Of these sites, 32 overlap with the Study 17.3 region for verification.

A KML file with all these sites is available with names or without names.

Projection Analysis

As our simulation region gets larger, we needed to review the impact of the projection we are using for the simulations. An analysis of the impact of various projections by R. Graves is summarized in this posting:

• Projection Comparision

Velocity Models

For Study 18.3, we are querying velocity models in the following order of precedence:

1. USGS Bay Area model
2. CCA-06
3. CVM-S4.26.M01
4. 1D background model

A KML file showing the model regions is available here.

We had originally planned to query them in the order 1) USGS Bay Area; 2) CVM-S4.26.M01; 3) CCA-06; 4) 1D background; but upon inspection of the cross-sections, CCA-06 seems to capture the Great Valley basins better than CVM-S4.26, leading to better agreement with the southern edge of the USGS Bay Area model. We are investigating adding the Ely GTL to the CCA-06 model to compensate for the lack of low-velocity, near-surface structure in CCA-06, since the tomographic inversion was performed at 900 m/s.

We will apply a minimum Vs of 500 m/s.

We will smooth to a distance of 10 km either side of a velocity model interface.

Update Vs cross-sections

We have updated the CyberShake 18.5 velocity model to tile USGS Bay Area, CCA06, and CVM-S4.26. Also we have added the Ely GTL to the models. Then, we extracted horizontal cross-sections at 0 km, 0.1 km, 1 km, and 10 km. The 0 km cross-section also indicates the vertical cross-section locations.

Vs cross-sections

We have extracted horizontal cross-sections at 0 km, 0.1 km, 1 km, and 10 km. The 0 km cross-section also indicates the vertical cross-section locations.

0 km depth

0.1 km depth

1 km depth

10 km depth

We extracted vertical cross-sections along 5 cuts parallel to the x-axis:

• Y index=1600: (38.929900, -124.363400) to (41.030000, -119.880200)
• Y index=3600: (37.413200, -123.140900) to (39.470700, -118.713500)
• Y index=5600: (35.884300, -121.967300) to (37.900400, -117.598200)
• Y index=7600: (34.344500, -120.838200) to (36.319900, -116.529600)
• Y index=9600: (32.794700, -119.750000) to (34.730300, -115.503600)

The southeast edge is on the left side of the plots.

y index=1600

y index=3600

y index=5600

y index=7600

y index=96006

and 2 cuts parallel to the y-axis:

• X index=1500: (40.866500, -123.900300) to (32.207800, -117.529700)
• X index=3000: (41.579900, -122.388500) to (32.844200, -116.127900)

The northwestern edge is on the left of the plots.

y index=1500

y index=3000

Computational and Data Estimates

Computational Estimates

In producing the computational estimates, we selected the four N/S/E/W extreme sites in the box which 1)within the 200 km cutoff for southern SAF events (381 sites) and 2)were outside the cutoff (488 sites). We produced inside and outside averages and scaled these by the number of inside and outside sites.

We also modified the box to be at an angle of 30 degrees counterclockwise of vertical, which makes the boxes about 15% smaller than with the previously used angle of 55 degrees.

We scaled our results based on the Study 17.3 performance of site s975, a site also in Study 18.3, and the Study 15.4 performance of DBCN, which used a very large volume and 100m spacing.

SGT calculation

	# Grid points	#VMesh gen nodes	Mesh gen runtime	# GPUs	SGT job runtime	Titan SUs	BW node-hrs
Inside cutoff, per site	23.1 billion	192	0.85 hrs	800	1.35 hrs	69.7k	2240
Outside cutoff, per site	10.2 billion	192	0.37 hrs	800	0.60 hrs	30.8k	990
Total						41.6M	1.34M

For the post-processing, we quantified the amount of work by determining the number of individual rupture points to process (summing, over all ruptures, the number of rupture variations for that rupture times the number of rupture surface points) and multiplying that by the number of timesteps. We then scaled based on performance of s975 from Study 17.3, and DBCN in Study 15.4.

Below we list the estimates for Blue Waters or Titan.

PP calculation

	#Points to process	#Nodes (BW)	BW runtime	BW node-hrs	#Nodes (Titan)	Titan runtime	Titan SUs
Inside cutoff, per site	5.96 billion	120	9.32 hrs	1120	240	10.3 hrs	74.2k
Outside cutoff, per site	2.29 billion	120	3.57 hrs	430	240	3.95 hrs	28.5k
Total				635K			42.2M

One potential computational plan is to split the SGT calculations 25% BW/75% Titan, and split the PP the other way: 75% BW, 25% Titan. With a 20% margin, this would require 50.17M SUs on Titan, and 973K node-hrs on Blue Waters.

Currently we have 91.7M SUs available on Titan (expires 12/31/18), and 8.14M node-hrs on Blue Waters (expires 8/31/18). Based on the 2016 PRAC (spread out over 2 years), we budgeted approximately 6.2M node-hours for CyberShake on Blue Waters this year, of which we have used 0.01M.

Data Estimates

SGT size estimates are scaled based on the number of points to process.

Data estimates

	#Grid points	Velocity mesh	SGTs size	Temp data	Output data
Inside cutoff, per site	23.1 billion	271 GB	410 GB	1090 GB	19.1 GB
Outside cutoff, per site	10.2 billion	120 GB	133 GB	385 GB	9.3 GB
Total		158 TB	216 TB	589 TB	11.6 TB

If we plan on all the SGTs on Titan and split the PP 25% Titan, 75% Blue Waters, we will need:

Titan: 589 TB temp files + 3 TB output files = 592 TB

Blue Waters: 162 TB SGTs + 9 TB output files = 171 TB

SCEC storage: 1 TB workflow logs + 11.6 TB output data files = 12.6 TB(45 TB free)

Database usage: (4 rows PSA [@ 2, 3, 5, 10 sec] + 12 rows RotD [RotD100 and RotD50 @ 2, 3, 4, 5, 7.5, 10 sec])/rupture variation x 225K rupture variations/site x 869 sites = 3.1 billion rows x 125 bytes/row = 364 GB (2.0 TB free on moment.usc.edu disk)