Difference between revisions of "UCVM sfcvm geomodelgrid"

Revision as of 16:53, 10 April 2024

1 UCVM with SFCVM
2 SFCVM in UCVM
3 Plots from web viewer
4 New command line option for model specific configuration
5 More detailed plots from SFCVM
6 Detail plots from Cencal
7 High Velocity surface regions in SFCVM
8 SFCVM(detailed + regional regions) with Gabbro modification
9 Vertical Slice
10 More Study
11 With different grid step processing
12 With a Different step down processing
13 With minimum squashing elevation of 45000
14 fixed geomodelgrid's handling of zone-id
15 Under the water and near the water step-down search logic
16 Gabbro in Sierra
17 Baseline, original CENCAL

UCVM with SFCVM

Software stack for supporting geomodelgrid based format:

curl (curl-7.87.0)
hdf5 (hdf5-1.10.9)
openssl (openssl-3.0.8)
proj (proj-8.1.1)
sqlite (sqlite-autoconf-3400100)
tiff (tiff-4.5.0)

SFCVM in UCVM

geomodelgrid based SFCVM is set with

   
    geomodelgrids_squery_setSquashing(sfcvm_geo_query_object, GEOMODELGRIDS_SQUASH_TOPOGRAPHY_BATHYMETRY);
    geomodelgrids_squery_setSquashMinElev(sfcvm_geo_query_object, SFCVM_SquashMinElev);

where SFCVM_SquashMinElev is default to -5000m (sfcvm is elevation based, depth is negative value)

NOTE: For locations that are below water, their geomodelgrids_squery_queryTopoBathyElevation() could return a NA value and so a grid height is added across the board to always have an usable value.

Plots from web viewer

sfcvm regions

sfcvm cross section

sfcvm depth 0m

sfcvm depth 100m

sfcvm depth 1000m

sfcvm depth 5000m

sfcvm depth 6000m

New command line option for model specific configuration

UCVM option:

-P Optional model configuration(model_param:key,value)

Example:

ucvm_query -l 37.455000,-121.941,3000 -m sfcvm -f ../../conf/ucvm.conf -P sfcvm_param:SquashMinElev,-5000.0

Allows multiple -P options,

ucvm_query ... -P cvmh_param:USE_1D_BKG,False -P cvmh_param:USE_GTL,False

More detailed plots from SFCVM

Internal calls from web viewer, (set e to 0,100,1000,5000,6000)

PROJ_LIB=/usr/local/share/anaconda2/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/share/anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TARGET/ucvm_plotting plot_horizontal_slice.py  -d vs -c sfcvm -s 0.010 -a sd -o ../result/UCVM_15167424_h.png -n ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET  -b 36.5416,-123.8269 -u 38.8108,-120.6299 -e 0

sfcvm depth 0m

sfcvm depth 100m

sfcvm depth 1000m

sfcvm depth 5000m

sfcvm depth 6000m

Detail plots from Cencal

cencal depth 0m

cencal depth 100m

cencal depth 1000m

cencal depth 5000m

cencal depth 6000m

cencal cross section

High Velocity surface regions in SFCVM

Horizontal region,

horizontal region

plot_horizontal_slice.py  -d vs -c sfcvm,elygtl:taper -s 0.0005 -a sd -o ../result/UCVM_18933492_h.png -n ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET  -L 500,1700,1700 -z 0,700 -b 37.6021,-122.1711 -u 37.7922,-122.0021 -e 500 -A 0.0,4.0

with sfcvm (only detailed region)

at depth 0m

at depth 500m

at depth 1000m

at depth 5000m

with sfcvm,elygtl:taper (only detailed region)

at depth 0m with taper

at depth 500m with taper

at depth 1000m with taper

with sfcvm,elygtl:taper -A 0,2 (only detailed region)

at depth 0m with taper

at depth 50m with taper

at depth 100m with taper

SFCVM(detailed + regional regions) with Gabbro modification

Upper San Leandro Gabbro region Map,

regions

Rectangle horizontal box,

no Gabbro

Gabbro

Lower Cross section,

no Gabbro

Gabbro

Diagonal Cross section,

no Gabbro

Gabbro

Depth Profile at the blue marker,

no Gabbro

Gabbro

Comparing depth profile plot (red=no gabbro, blue=gabbro)

vs comparison

zoomed in vs comparison

vp comparison

with Gabbro modification (full detailed +regional regions)

at depth 0m with Gabbro

at depth 500m with Gabbro

at depth 1000m with Gabbro

at depth 5000m with Gabbro

at depth 7500m with Gabbro

Vertical Slice

vertical section

with sfcvm (detailed region)

plot_cross_section.py -s 0 -h 48 -d vs -c sfcvm,elygtl:taper -a sd -o ../result/UCVM_23820778_c.png -n ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET -v 25 -L 500,1700,1700 -z 0,700 -b 37.7026,-122.1728 -u 37.701,-121.9984 -e 5000 -A 0.0,4.0

vertical slice upto 1k

vertical slice upto 50k

with sfcvm,elygtl:taper (detailed region)

vertical slice upto 1k

vertical slice upto 50k

More Study

SFCVM (detailed+regional)

sfcvm coverage

With Water-Step1-Step2 modifications

 surf = geomodelgrids_squery_queryTopoBathyElevation
 surf < 0:
    call geomodelgrids_squery_query with elevation= N
    if vs<0 || vp<0
       call geomodelgrids_squery_query with elevation= N-25 (first step down grid height)
       if vs < 0 || vp < 0
          call geomodelgrids_squery_query with elevation= N-125 (second step down grid height)

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:
/usr/local/share/anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin 
PYTHONPATH=../model/UCVM_TARGET/ucvm_plotting plot_horizontal_slice.py  -d vs -c sfcvm
 -s 0.010 -a sd -o ../result/UCVM_93552953_h.png -n ../model/UCVM_TARGET/conf/ucvm.con
f -i ../model/UCVM_TARGET  -b 34.5541,-126.9141 -u 41.4695,-117.9492 -e 0 -A 0,4

sfcvm gabbro map

sfcvm gabbro 0m

With Water-Step1-Step2-again modification

  surf = geomodelgrids_squery_queryTopoBathyElevation

  surf < 0:
     call geomodelgrids_squery_query with elevation= N
     if vs<0 || vp<0
        call geomodelgrids_squery_query with elevation= N-25 (first step down grid height)
        if vs < 0 || vp < 0
           call geomodelgrids_squery_query with elevation= N-125 (second step down grid height)

           while ( vs < 0 || vp < 0 )
             call geomodelgrids_squery_query with elevation= N-125-(25*step)
           until vs>0 && vp>0 || step > 100

sfcvm gabbro water 0m

With finer grid, grid step of 0.01

DONE:
    total query count=(622314)
    total gabbro count=(78)
    total water count=(89765)
    total water step count=(89180)
    total water loop count=(43286)
    max water loops =(57)

With different grid step processing

With grid step of 0.10

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:
/usr/local/share/anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin 
PYTHONPATH=../model/UCVM_TARGET/ucvm_plotting plot_horizontal_slice.py  -d vs -c sfcvm
 -s 0.10 -a sd -o ../result/UCVM_59976096_h.png -n ../model/UCVM_TARGET/conf/ucvm.conf
 -i ../model/UCVM_TARGET  -b 34.5541,-126.9141 -u 41.4695,-117.9492 -e 0 -A 0,4

sfcvm less detail plot 0m

Status result,

step count is the number of query that needed stepping down

max loops is the max number of looping a step-down query needed ie. there is a location that needs to go down to 125+(22*25) meters before finding a valid data


DONE:
    total query count=(6461)
    total gabbro count=(0)
    total water count=(894)
    total water step count=(890)
    total water loop count=(435)
    max water loops =(22)

With a Different step down processing

Using Squash Min Elevation of -45000.


 surf = geomodelgrids_squery_queryTopoBathyElevation
 surf < 0:
    call geomodelgrids_squery_query with elevation= N
    if vs < 0 || vp < 0
       call geomodelgrids_squery_query with elevation= N-25 (first step down grid height)
       if vs < 0 || vp < 0
          cnt=1
          while 
             call geomodelgrids_squery_query with elevation= N-(125*cnt)(second step down grid height)
             if vs > 0 && vp > 0
                 // FOUND IT... TODO: additional backtrack processing
             else
                 try again

sfcvm plot 0m

   

    total query count=(622314)
    total gabbro count=(82)
    total water count=(89765)
    total water step count=(89180)
    total water 2 step count=(69498)
    max water step =(10)

  
  In the 2-step while loop, number of query to number of cnt
 
  61482     done(1) 
      1     done(10) 
   7997     done(2) 
     11     done(3) 
      4     done(4) 
      1     done(5) 
      1     done(6) 
      1     done(8) 

??? 
WATER: still bad : at -124.824100 40.314100 -127.914481 -- surface -1025.307276 zsquash -1150.307276
WATER: still bad : at -124.824100 40.314100 -255.828962 -- surface -1025.307276 zsquash -1275.307276
WATER: still bad : at -124.824100 40.314100 -383.743443 -- surface -1025.307276 zsquash -1400.307276
WATER: still bad : at -124.824100 40.314100 -511.657924 -- surface -1025.307276 zsquash -1525.307276
WATER: still bad : at -124.824100 40.314100 -639.572405 -- surface -1025.307276 zsquash -1650.307276
WATER: still bad : at -124.824100 40.314100 -767.486886 -- surface -1025.307276 zsquash -1775.307276
WATER: still bad : at -124.824100 40.314100 -895.401367 -- surface -1025.307276 zsquash -1900.307276
WATER: still bad : at -124.824100 40.314100 -1023.315849 -- surface -1025.307276 zsquash -2025.307276
WATER: still bad : at -124.824100 40.314100 -1151.230330 -- surface -1025.307276 zsquash -2150.307276
    done(10) : at -124.824100 40.314100 -1279.144811 -- surface -1025.307276 zsquash -2275.307276  : previous_zsquash -2150.307276 previous_n_entry_elevation -1151.230330

For points with cnt of 3+

sfcvm lagoon with cnt >=3 0m

For point with cnt of 10

sfcvm lagoon with cnt == 10 0m

With minimum squashing elevation of 45000

double SFCVM_SquashMinElev=-45000.0

extended geomodelgrids c-api:

/** Query for model at point. 
 *
 * @param[inout] handle Handle to query object.
 * @param[in] x X coordinate of point (in input CRS).
 * @param[in] y Y coordinate of point (in input CRS).
 * @returns model index at point.
 */
int geomodelgrids_squery_queryModelContains(void* handle,
                                            const double x,
                                            const double y);

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/share
/anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TARGET/
ucvm_plotting plot_horizontal_slice.py  -d vs -c sfcvm -s 0.001 -a sd -o ../result/UCVM_72526857_h.png
 -n ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET  -b 37.3249,-122.6129 -u 38.2366,-121.
6187 -e 0

0 m

100m

1000m

0m elevation

100m elevation

1000m elevation

fixed geomodelgrid's handling of zone-id

fixed geomodelgrids' handling of interpolating all stored material properties including type-enumerated data like rock type.

Logic:

if data has no 'units', then use nearest data point
if data has 'units',  then interpolated with surrounding points

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/share/
anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TARGET/uc
vm_plotting plot_horizontal_slice.py  -d vs -c sfcvm -s 0.010 -a sd -o ../result/$FNAME.png -n ../model
/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET  -b 34.5541,-126.9141 -u 41.4695,-117.9492 -e 0 -A 
0,4

79 interpolated gabbro points

28 nearest gabbro pointsm

interpolated gabbro

nearest gabbro

plot_cross_section.py -s 0 -e 5000 -h 10  -d vs -c sfcvm -a sd -o ../result/UCVM_23820778_c.png -n ../model
/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET -v 25 -b 37.78,-122.17 -u 37.80,-122.141 -A 1.0,4.0

interpolated gabbro

nearest gabbro

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/share/anac
onda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TARGET/ucvm_plott
ing plot_horizontal_slice.py  -d vs -c sfcvm -s 0.0001 -a sd -o ../result/$FNAME.png -n ../model/UCVM_TARGE
T/conf/ucvm.conf -i ../model/UCVM_TARGET  -b 37.7784,-122.17 -u 37.7991,-122.14 -e 0 -A 1,4

interpolated gabbro

nearest gabbro

Under the water and near the water step-down search logic

   zSurf from geomodelgrids_squery_queryTopoBathyElevation,
  
   zSquashed is new squashed elevation

   make initial geomodelgrids_squery_query call,

   do step-down search iterations 
      if  (query failed and zSurf < 0)
      or 
      if  (zSquashed < zSurf || zSurf < 0) and (vp != NODATA) and (vs == NODATA)

Gabbro in Sierra


  In regional area, 
    zone_ids : "GV gabbro":3

From Brad, sfcvm's regional area

sfcvm region zones

File:Sfcvm-sierra-gabbro-region.png

Sierra region

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/share/anaconda2
/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TARGET/ucvm_plotting plot_d
epth_profile.py  -n ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET -d vs,vp,density -c sfcvm -o ../
result/UCVM_66661243_v.png -C 'San Francisco Bay Velocity Model' -v 100 -b 0 -s 36.9082,-119.4763 -e 30000

gabbro processing depth profile

no gabbro processing depth profile

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/sha
re/anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TAR
GET/ucvm_plotting plot_horizontal_slice.py  -d vs -c sfcvm -s 0.010 -a sd -o ../result/$FNAME.png -n
 ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET -b 36.5383,-122.234 -u 38.8162,-119.334
 -e 0 -A 0,4

gabbro processing 0m

no gabbro processing 0m

gabbro processing 1000m

no gabbro processing 1000m

PROJ_LIB=../model/UCVM_TARGET/lib/proj/share/proj PATH=/usr/local/share/anaconda2/bin:/usr/local/sha
re/anaconda2/condabin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin PYTHONPATH=../model/UCVM_TAR
GET/ucvm_plotting plot_cross_section.py -s 0 -h 1186 -d vs -c sfcvm -a sd -o ../result/$FNAME.png -n
 ../model/UCVM_TARGET/conf/ucvm.conf -i ../model/UCVM_TARGET -v 50 -b 37.0837,-121.2012 -u 37.0661,-
119.0698 -e 5000

gabbro processing

no gabbro processing

Baseline, original CENCAL

cencal map

cencal plot

@@ Line 520: / Line 520: @@
 {|
 | [[FILE:sfcvm-sierra-gabbro-region.png|thumb|400px| Sierra region]]
-| [[FILE:sfcvm-sierra-no-region.png|thumb|400px| Sierra region]]|}
+| [[FILE:sfcvm-sierra-no-region.png|thumb|400px| Sierra region]]
+|}
 <pre>

Difference between revisions of "UCVM sfcvm geomodelgrid"

Revision as of 16:53, 10 April 2024

Contents

UCVM with SFCVM

SFCVM in UCVM

Plots from web viewer

New command line option for model specific configuration

More detailed plots from SFCVM

Detail plots from Cencal

High Velocity surface regions in SFCVM

SFCVM(detailed + regional regions) with Gabbro modification

Vertical Slice

More Study

With different grid step processing

With a Different step down processing

With minimum squashing elevation of 45000

fixed geomodelgrid's handling of zone-id

Under the water and near the water step-down search logic

Gabbro in Sierra

Baseline, original CENCAL

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools