CyberShake Study 18.8

CyberShake 18.3 is a computational study to perform CyberShake in a new region, the extended Bay Area. We plan to use a combination of 3D models (USGS Bay Area detailed and regional, CVM-S4.26.M01, CCA-06) with a minimum Vs of 500 m/s and a frequency of 1 Hz. We will use the GPU implementation of AWP-ODC-SGT, the Graves & Pitarka (2014) rupture variations with 200m spacing and uniform hypocenters, and the UCERF2 ERF. The SGT and post-processing calculations will both be run on both NCSA Blue Waters and OLCF Titan.

Status

This study is under development. We hope to begin in March 2018.

Science Goals

The science goals for this study are:

• Expand CyberShake to the Bay Area.
• Calculate CyberShake results with the USGS Bay Area velocity model as the primary model.

Technical Goals

• Perform the largest CyberShake study to date.

Sites

Map showing Study 18.3 sites (cities=yellow, CISN stations=orange, missions=blue, 10 km grid=purple, 5 km grid=green, PG&E locations=pink. The Bay Area box is in orange and the Study 17.3 box is in magenta.

The Study 18.3 box is 180 x 390 km, with the long edge rotated 27 degrees counter-clockwise from vertical. The corners are defined to be:

South: (-121.51,35.52)
West: (-123.48,38.66)
North: (-121.62,39.39)
East: (-119.71,36.22)

We are planning to run 869 sites, 838 of which are new, as part of this study.

These sites include:

• 77 cities (74 new)
• 10 new missions
• 139 CISN stations (136 new)
• 46 new sites of interest to PG&E
• 597 sites along a 10 km grid (571 new)

Of these sites, 32 overlap with the Study 17.3 region for verification.

A KML file with all these sites is available with names or without names.

Velocity Models

For Study 18.3, we are planning to query velocity models in the following order, to populate CyberShake volumes:

1. USGS Bay Area model
2. CVM-S4.26.M01
3. CCA-06
4. 1D background model

We will apply a minimum Vs of 500 m/s.

We will smooth to a distance of 10 km either side of a velocity model interface.

Vs cross-sections

We have extracted horizontal cross-sections at 0 km and 1 km. The 0 km cross-section also indicates the vertical cross-section locations.

0 km depth

1 km depth

We extracted vertical cross-sections along 5 cuts parallel to the x-axis:

• Y index=1144, (36.747700, -126.242500) to (40.009400, -123.599700)
• Y index=3432, (35.647400, -124.092900) to (38.866100, -121.389900)
• Y index=5720, (34.509900, -122.002600) to (37.682400, -119.251200)
• Y index=8008, (33.337800, -119.969500) to (36.461400, -117.180700)
• Y index=10296, (32.133500, -117.991100) to (35.205700, -115.175300)

The southeast edge is on the left side of the plots.

y index=1144

y index=3432

y index=5720

y index=8008

y index=10296

and 2 cuts parallel to the y-axis:

• X index=1440, (38.385500, -126.495800) to (32.548400, -116.106300)
• X index=2880, (39.481600, -125.625400) to (33.565800, -115.163000)

The northwestern edge is on the left of the plots.

y index=1440

y index=2880

Computational and Data Estimates

Computational Estimates

In producing the computational estimates, we selected the four N/S/E/W extreme sites in the box which 1)within the 200 km cutoff for southern SAF events (381 sites) and 2)were outside the cutoff (488 sites). We produced inside and outside averages and scaled these by the number of inside and outside sites.

We also modified the box to be at an angle of 30 degrees counterclockwise of vertical, which makes the boxes about 15% smaller than with the previously used angle of 55 degrees.

We scaled our results based on the Study 17.3 performance of site s975, a site also in Study 18.3, and the Study 15.4 performance of DBCN, which used a very large volume and 100m spacing.

SGT calculation

	# Grid points	#VMesh gen nodes	Mesh gen runtime	# GPUs	SGT job runtime	SUs
Inside cutoff, per site	23.1 billion	192	0.85 hrs	800	1.35 hrs	69.7k
Outside cutoff, per site	10.2 billion	192	0.37 hrs	800	0.60 hrs	30.8k
Total						41.6M

For the post-processing, we quantified the amount of work by determining the number of individual rupture points to process (summing, over all ruptures, the number of rupture variations for that rupture times the number of rupture surface points) and multiplying that by the number of timesteps. We then scaled based on performance of s975 from Study 17.3, and DBCN in Study 15.4.

Below we list the estimates for Blue Waters or Titan.

PP calculation

	#Points to process	#Nodes (BW)	BW runtime	BW node-hrs	#Nodes (Titan)	Titan runtime	Titan SUs
Inside cutoff, per site	5.96 billion	120	9.32 hrs	1120	240	10.3 hrs	74.2k
Outside cutoff, per site	2.29 billion	120	3.57 hrs	430	240	3.95 hrs	28.5k
Total				635K			42.2M

Currently we have 91.7M SUs available on Titan (expires 12/31/18), and 8.14M node-hrs on Blue Waters (expires 8/31/18).