HighF v14.12
From SCECpedia
Jump to navigationJump to searchContents
High-F 14.12 Verification and Validation Exercise
This page collects information about a proposed high frequency verification and validation exercise. Planning started in Dec 2014.
Agreements Needed
- Simulation Volume for AWP
- Simulation Volume for Hercules
- Projection used by AWP
- Project used by Hercules
- Number and location of sites used for ground motion comparison
- La Habra Point Source parameters
- Currently available code capabilities in GPU codes
- small scale heterogeneities
- FDQ
- Plasticity
- dynamic rupture source
- V and V exercise stages - need to be reviiewed and approved
Volume
The four corners are:
- -119.288842 34.120549
- -118.354016 35.061096
- -116.846030 34.025873
- -117.780976 33.096503
Volume size:
- 180,000 m x 135,000 m x 61,875 m = 1.503e15 m3
Simulation Box / Velocity Model
| Parameter | Value | Notes |
|---|---|---|
| Dimensions (km) | 180 x 135 x 61.875 | |
| Bounding Box (LL) | -119.288842 34.120549, -118.354016 35.061096, -116.846030 34.025873, -117.780976 33.096503 | |
| UCVM Version | 14.3.0 | No heterogeneities |
| Velocity Model Versions | CVM-S4v26 | |
| Miniumum Vs | 500 m/s | |
| Samples per wavelength | 6 to 7 - AWP |
Point Source Parameters
| Parameter | Value | Notes |
|---|---|---|
| Event Name | La Habra | |
| Origin Time | 2014/03/29 04:09:42.97 | Source: En-Jui |
| Origin Location | -117.930; 33.922; 5.0km | Source: En-Jui |
| Strike/Dip/Rake 1 | 134/55/155 | Source: En-Jui, initial |
| Strike/Dip/Rake 2 | 239/70/38 | Source: En-Jui, based on review of aftershock sequence |
| Rise Time | 0.75 s |
Solver Parameters
| Parameter | Value | Notes |
|---|---|---|
| Frequency | 4.0 Hz | |
| Simulation Length | 200 s | |
| Delta T | 0.005 | |
| Plane Output Resolution | 250m | |
| I/O Print Rate | every 10 steps | |
| Station List | TBD | |
| Software Version | TBD |
