Difference between revisions of "UCVM on Frontier"

From SCECpedia
Jump to navigationJump to search
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
== Testing the UCVM installation on Frontier ==
 +
We are implementing tests of the development v3ersion of UCVM used for CyberShake NorCal. At the end of the install, we expect the following model to be available:
 +
* SFCVM
 +
* CCA
 +
* nc1d
 +
 +
== Building Process ==
 +
Building on the head node is very slow. We req
 +
Looks like we need to build on compute node. But compute node not network accessible. So do git clone, and largefile downloads on head node, then when ready to make, request a compute node.
 +
 +
== Define INSTALL PATH ==
 +
 +
UCVM_INSTALL_PATH
 +
/lustre/orion/proj-shared/geo156/pmaech/scratch/TARGET_UCVM_SFCVM/ucvm_install
 +
 
== Setup Frontier Modules ==
 
== Setup Frontier Modules ==
 +
<pre>
 +
[login03.frontier ~]$ module list
  
−
module load cray-python
+
Currently Loaded Modules:
−
module load libtool/2.4.6
+
  1) craype-x86-trento                      7) cray-dsmml/0.2.2      13) darshan-runtime/3.4.0
−
module load libfabric
+
  2) craype-network-ofi                      8) cray-libsci/22.12.1.1  14) hsi/default
−
module load gcc/10.3.0   
+
  3) perftools-base/22.12.0                  9) PrgEnv-cray/8.3.3      15) lfs-wrapper/0.0.1
 +
  4) xpmem/2.6.2-2.5_2.22__gd067c3f.shasta  10) cray-python/3.9.13.1  16) DefApps/default
 +
  5) cray-pmi/6.1.8                        11) libfabric/1.15.2.0    17) libtool/2.4.6
 +
  6) craype/2.7.19                          12) gcc/10.3.0            18) cray-mpich/8.1.23
 +
</pre>
 +
 
 +
This is typically built by keeping the default modules plus these:
 +
*module load cray-python
 +
*module load libtool/2.4.6
 +
*module load libfabric
 +
*module load gcc/10.3.0   
  
−
Testing with other account showed this working
+
Testing with two account showed this built ucvm binaries and tests(except CCA) passed.
  
 
== Example Installation ==
 
== Example Installation ==
Line 56: Line 83:
  
 
</pre>
 
</pre>
−
== Interactive session to run Acceptance Tests ==
+
== Interactive session to run Build UCVM or run Acceptance Tests ==
 +
<pre>
 +
salloc -A geo156 -N 1 -t 1:30:00 -J UCVM_Tests -q debug
 +
</pre>
 +
 
 +
== Frontier library not loading ==
 +
<pre>
 +
 
 +
This file contains any messages produced by compilers while
 +
running configure, to aid debugging if configure makes a mistake.
 +
 
 +
It was created by UCVM configure 22.7.0, which was
 +
generated by GNU Autoconf 2.69.  Invocation command line was
 +
 
 +
  $ ./configure --enable-silent-rules --with-fftw-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/fftw/include --with-fftw-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/fftw/lib --with-etree-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/euclid3/include --with-etree-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/euclid3/lib --with-hdf5-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/hdf5/include --with-hdf5-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/hdf5/lib --with-openssl-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/openssl/include --with-openssl-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/openssl/lib --with-tiff-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/tiff/include --with-tiff-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/tiff/lib --with-sqlite-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/sqlite/include --with-sqlite-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/sqlite/lib --with-curl-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/curl/include/curl --with-curl-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/curl/lib --with-proj-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/proj/include --with-proj-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/proj/lib --enable-model-cca --with-cca-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cca/lib --with-cca-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cca/include --enable-model-cvms --with-cvms-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvms/include --with-cvms-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvms/lib --with-cvms-model-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvms/src --enable-model-cvmsi --with-cvmsi-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvmsi/lib --with-cvmsi-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvmsi/include --with-cvmsi-model-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvmsi/model/i26 --enable-model-sfcvm --with-sfcvm-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/sfcvm/lib --with-sfcvm-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/sfcvm/include --with-sfcvm-model-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/sfcvm/src --prefix=/lustre/orion/geo156/scratch/dean316/build_UCVM/build
 +
 
 +
## --------- ##
 +
## Platform. ##
 +
## --------- ##
 +
 
 +
hostname = login13
 +
uname -m = x86_64
 +
uname -r = 5.14.21-150400.24.46_12.0.83-cray_shasta_c
 +
uname -s = Linux
 +
uname -v = #1 SMP Tue May 23 03:16:47 UTC 2023 (c6cda89)
 +
 
 +
/usr/bin/uname -p = x86_64
 +
/bin/uname -X    = unknown
 +
 
 +
/bin/arch              = x86_64
 +
/usr/bin/arch -k      = unknown
 +
/usr/convex/getsysinfo = unknown
 +
/usr/bin/hostinfo      = unknown
 +
/bin/machine          = unknown
 +
/usr/bin/oslevel      = unknown
 +
/bin/universe          = unknown
 +
 
 +
PATH: /sw/frontier/lfs-wrapper/0.0.1/bin/lfs
 +
PATH: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/bin
 +
PATH: /opt/cray/pe/mpich/8.1.23/bin
 +
PATH: /sw/sources/hpss/bin
 +
PATH: /sw/frontier/spack-envs/base/opt/cray-sles15-zen3/gcc-10.3.0/darshan-runtime-3.4.0-g5tkbmgrfje7vnnh7ppfb6s5b7frivrl/bin
 +
PATH: /opt/cray/pe/gcc/10.3.0/bin
 +
PATH: /opt/cray/libfabric/1.15.2.0/bin
 +
PATH: /sw/frontier/spack-envs/base/opt/cray-sles15-zen3/gcc-10.3.0/libtool-2.4.6-4kukgkkoovpfysxbav23pbrddwn7kjbm/bin
 +
PATH: /opt/cray/pe/python/3.9.13.1/bin
 +
PATH: /opt/conda/bin
 +
PATH: /opt/clmgr/sbin
 +
PATH: /opt/clmgr/bin
 +
PATH: /opt/sgi/sbin
 +
PATH: /opt/sgi/bin
 +
PATH: /sw/frontier/bin
 +
PATH: /ccs/home/dean316/.local/bin
 +
PATH: /usr/local/bin
 +
PATH: /usr/bin
 +
PATH: /bin
 +
PATH: /opt/bin
 +
PATH: /opt/c3/bin
 +
PATH: /usr/lib/mit/bin
 +
PATH: /opt/puppetlabs/bin
 +
PATH: /sbin
 +
 
 +
 
 +
## ----------- ##
 +
## Core tests. ##
 +
## ----------- ##
 +
 
 +
configure:2426: checking for a BSD-compatible install
 +
configure:2494: result: /usr/bin/install -c
 +
configure:2505: checking whether build environment is sane
 +
configure:2560: result: yes
 +
configure:2711: checking for a thread-safe mkdir -p
 +
configure:2750: result: /usr/bin/mkdir -p
 +
configure:2757: checking for gawk
 +
configure:2773: found /usr/bin/gawk
 +
configure:2784: result: gawk
 +
configure:2795: checking whether make sets $(MAKE)
 +
configure:2817: result: yes
 +
configure:2846: checking whether make supports nested variables
 +
configure:2863: result: yes
 +
configure:3032: checking for ranlib
 +
configure:3048: found /usr/bin/ranlib
 +
configure:3059: result: ranlib
 +
configure:3087: checking build system type
 +
configure:3101: result: x86_64-pc-linux-gnu
 +
configure:3121: checking host system type
 +
configure:3134: result: x86_64-pc-linux-gnu
 +
configure:3213: checking for style of include used by make
 +
configure:3241: result: GNU
 +
configure:3267: checking whether to compile using MPI
 +
configure:3274: result: yes
 +
configure:3330: checking for mpicc
 +
configure:3346: found /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/bin/mpicc
 +
configure:3357: result: mpicc
 +
configure:3431: checking for gcc
 +
configure:3458: result: mpicc
 +
configure:3687: checking for C compiler version
 +
configure:3696: mpicc --version >&5
 +
gcc (GCC) 10.3.0 20210408 (Cray Inc.)
 +
Copyright (C) 2020 Free Software Foundation, Inc.
 +
This is free software; see the source for copying conditions.  There is NO
 +
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 +
 
 +
configure:3707: $? = 0
 +
configure:3696: mpicc -v >&5
 +
mpicc for MPICH version 8.1.23
 +
Using built-in specs.
 +
COLLECT_GCC=/opt/cray/pe/gcc/10.3.0/bin/../snos/bin/gcc
 +
COLLECT_LTO_WRAPPER=/opt/cray/pe/gcc/10.3.0/snos/libexec/gcc/x86_64-suse-linux/10.3.0/lto-wrapper
 +
Target: x86_64-suse-linux
 +
Configured with: ../cpe-gcc-10.3.0-202104220029.0777bcc28ac1d/configure --prefix=/opt/cray/pe/gcc/10.3.0/snos --disable-nls --libdir=/opt/cray/pe/gcc/10.3.0/snos/lib --enable-languages=c,c++,fortran --with-gxx-include-dir=/opt/cray/pe/gcc/10.3.0/snos/include/g++ --with-slibdir=/opt/cray/pe/gcc/10.3.0/snos/lib --with-system-zlib --enable-shared --enable-__cxa_atexit --build=x86_64-suse-linux --with-ppl --with-cloog --disable-multilib
 +
Thread model: posix
 +
Supported LTO compression algorithms: zlib
 +
gcc version 10.3.0 20210408 (Cray Inc.) (GCC)
 +
configure:3707: $? = 0
 +
configure:3696: mpicc -V >&5
 +
gcc: error: unrecognized command-line option '-V'
 +
configure:3707: $? = 1
 +
configure:3696: mpicc -qversion >&5
 +
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
 +
configure:3707: $? = 1
 +
configure:3727: checking whether the C compiler works
 +
configure:3749: mpicc    conftest.c  >&5
 +
/usr/bin/ld: warning: libfabric.so.1, needed by /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so, not found (try using -rpath or -rpath-link)
 +
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_version@FABRIC_1.0'
 +
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_dupinfo@FABRIC_1.3'
 +
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_strerror@FABRIC_1.0'
 +
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_freeinfo@FABRIC_1.3'
 +
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_fabric@FABRIC_1.1'
 +
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_getinfo@FABRIC_1.3'
 +
collect2: error: ld returned 1 exit status
 +
configure:3753: $? = 1
 +
configure:3791: result: no
 +
configure: failed program was:
 +
| /* confdefs.h */
 +
| #define PACKAGE_NAME "UCVM"
 +
| #define PACKAGE_TARNAME "ucvm"
 +
| #define PACKAGE_VERSION "22.7.0"
 +
| #define PACKAGE_STRING "UCVM 22.7.0"
 +
| #define PACKAGE_BUGREPORT "software@scec.org"
 +
| #define PACKAGE_URL ""
 +
| #define PACKAGE "ucvm"
 +
| #define VERSION "22.7.0"
 +
| /* end confdefs.h.  */
 +
|
 +
| int
 +
| main ()
 +
| {
 +
|
 +
|  ;
 +
|  return 0;
 +
| }
 +
configure:3796: error: in `/lustre/orion/geo156/scratch/dean316/build_UCVM/UCVM':
 +
configure:3798: error: C compiler cannot create executables
 +
See `config.log' for more details
 +
</pre>
 +
 
 
<pre>
 
<pre>
−
salloc -A geo156 -N 1 -t 0:30:00 -J UCVM_Tests -q debug
+
Problem that we are seeing on Frontier.  This is the work around,
 +
 
 +
cat -10  config.log > r
 +
 
 +
edit r to just have the configure command call
 +
 
 +
./r  to run the command by hand
 +
 
 +
make
 +
make install
 +
 
 +
and
 +
 
 +
./ucvm_setup.py -a -r -d -p YOUR_UCVM_INSTALL_PATH
 +
 
 +
check if
 +
 
 +
/conf  directory has ucvm_env.sh
 
</pre>
 
</pre>
 +
 +
== Related Entries ==
 +
*[https://github.com/sceccode/test_ucvm Frontier UCVM Slurm and Configuration Scripts GitHub]
 +
*[[UCVM]]

Latest revision as of 01:44, 29 April 2024

Testing the UCVM installation on Frontier

We are implementing tests of the development v3ersion of UCVM used for CyberShake NorCal. At the end of the install, we expect the following model to be available:

  • SFCVM
  • CCA
  • nc1d

Building Process

Building on the head node is very slow. We req Looks like we need to build on compute node. But compute node not network accessible. So do git clone, and largefile downloads on head node, then when ready to make, request a compute node.

Define INSTALL PATH

UCVM_INSTALL_PATH /lustre/orion/proj-shared/geo156/pmaech/scratch/TARGET_UCVM_SFCVM/ucvm_install

Setup Frontier Modules

[login03.frontier ~]$ module list

Currently Loaded Modules:
  1) craype-x86-trento                       7) cray-dsmml/0.2.2       13) darshan-runtime/3.4.0
  2) craype-network-ofi                      8) cray-libsci/22.12.1.1  14) hsi/default
  3) perftools-base/22.12.0                  9) PrgEnv-cray/8.3.3      15) lfs-wrapper/0.0.1
  4) xpmem/2.6.2-2.5_2.22__gd067c3f.shasta  10) cray-python/3.9.13.1   16) DefApps/default
  5) cray-pmi/6.1.8                         11) libfabric/1.15.2.0     17) libtool/2.4.6
  6) craype/2.7.19                          12) gcc/10.3.0             18) cray-mpich/8.1.23

This is typically built by keeping the default modules plus these:

  • module load cray-python
  • module load libtool/2.4.6
  • module load libfabric
  • module load gcc/10.3.0

Testing with two account showed this built ucvm binaries and tests(except CCA) passed.

Example Installation

Code is built a UCVM installtion on Frontier at : /ccs/home/mei/scratch/TARGET_UCVM_SFCVM/ucvm_install 

   source conf/ucvm_env.sh
   which ucvm_query
   ucvm_query -H

Next is to run test/run_testing to run some basic unit testing

Install Script on Frontier

#!/bin/bash
#
#
hn=`hostname -d`
ppwd=`pwd`

export MY_TOP=$ppwd/scratch

export TOP_UCVM_TARGET=$MY_TOP/TARGET_UCVM_SFCVM
export UCVM_SRC_PATH=$TOP_UCVM_TARGET/UCVM
export UCVM_INSTALL_PATH=$TOP_UCVM_TARGET/ucvm_install
export UCVM_SALLOC_ENV="-A geo156 -q debug"
export LD_LIBRARY_PATH=/opt/cray/libfabric/1.15.2.0/lib64:$LD_LIBRARY_PATH
export LIBRARY_PATH=/opt/cray/libfabric/1.15.2.0/lib64:$LIBRARY_PATH

rm -rf $TOP_UCVM_TARGET 
mkdir $TOP_UCVM_TARGET

cd $TOP_UCVM_TARGET
git clone https://github.com/SCECcode/ucvm.git -b withSFCVM UCVM

cd $UCVM_SRC_PATH/largefiles
./get_largefiles.py -m sfcvm,cca,cvmsi,cvms

cd $UCVM_SRC_PATH/largefiles; ./stage_largefiles.py

cd $UCVM_SRC_PATH
./ucvm_setup.py -d -a -p $UCVM_INSTALL_PATH &> ucvm_setup_install.log

cd $UCVM_SRC_PATH; make check &> make_check.log

echo "..EXITING.."
exit

Interactive session to run Build UCVM or run Acceptance Tests

salloc -A geo156 -N 1 -t 1:30:00 -J UCVM_Tests -q debug

Frontier library not loading


This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by UCVM configure 22.7.0, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ ./configure --enable-silent-rules --with-fftw-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/fftw/include --with-fftw-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/fftw/lib --with-etree-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/euclid3/include --with-etree-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/euclid3/lib --with-hdf5-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/hdf5/include --with-hdf5-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/hdf5/lib --with-openssl-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/openssl/include --with-openssl-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/openssl/lib --with-tiff-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/tiff/include --with-tiff-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/tiff/lib --with-sqlite-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/sqlite/include --with-sqlite-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/sqlite/lib --with-curl-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/curl/include/curl --with-curl-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/curl/lib --with-proj-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/proj/include --with-proj-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/lib/proj/lib --enable-model-cca --with-cca-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cca/lib --with-cca-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cca/include --enable-model-cvms --with-cvms-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvms/include --with-cvms-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvms/lib --with-cvms-model-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvms/src --enable-model-cvmsi --with-cvmsi-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvmsi/lib --with-cvmsi-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvmsi/include --with-cvmsi-model-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/cvmsi/model/i26 --enable-model-sfcvm --with-sfcvm-lib-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/sfcvm/lib --with-sfcvm-include-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/sfcvm/include --with-sfcvm-model-path=/lustre/orion/geo156/scratch/dean316/build_UCVM/build/model/sfcvm/src --prefix=/lustre/orion/geo156/scratch/dean316/build_UCVM/build

## --------- ##
## Platform. ##
## --------- ##

hostname = login13
uname -m = x86_64
uname -r = 5.14.21-150400.24.46_12.0.83-cray_shasta_c
uname -s = Linux
uname -v = #1 SMP Tue May 23 03:16:47 UTC 2023 (c6cda89)

/usr/bin/uname -p = x86_64
/bin/uname -X     = unknown

/bin/arch              = x86_64
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /sw/frontier/lfs-wrapper/0.0.1/bin/lfs
PATH: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/bin
PATH: /opt/cray/pe/mpich/8.1.23/bin
PATH: /sw/sources/hpss/bin
PATH: /sw/frontier/spack-envs/base/opt/cray-sles15-zen3/gcc-10.3.0/darshan-runtime-3.4.0-g5tkbmgrfje7vnnh7ppfb6s5b7frivrl/bin
PATH: /opt/cray/pe/gcc/10.3.0/bin
PATH: /opt/cray/libfabric/1.15.2.0/bin
PATH: /sw/frontier/spack-envs/base/opt/cray-sles15-zen3/gcc-10.3.0/libtool-2.4.6-4kukgkkoovpfysxbav23pbrddwn7kjbm/bin
PATH: /opt/cray/pe/python/3.9.13.1/bin
PATH: /opt/conda/bin
PATH: /opt/clmgr/sbin
PATH: /opt/clmgr/bin
PATH: /opt/sgi/sbin
PATH: /opt/sgi/bin
PATH: /sw/frontier/bin
PATH: /ccs/home/dean316/.local/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /opt/bin
PATH: /opt/c3/bin
PATH: /usr/lib/mit/bin
PATH: /opt/puppetlabs/bin
PATH: /sbin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2426: checking for a BSD-compatible install
configure:2494: result: /usr/bin/install -c
configure:2505: checking whether build environment is sane
configure:2560: result: yes
configure:2711: checking for a thread-safe mkdir -p
configure:2750: result: /usr/bin/mkdir -p
configure:2757: checking for gawk
configure:2773: found /usr/bin/gawk
configure:2784: result: gawk
configure:2795: checking whether make sets $(MAKE)
configure:2817: result: yes
configure:2846: checking whether make supports nested variables
configure:2863: result: yes
configure:3032: checking for ranlib
configure:3048: found /usr/bin/ranlib
configure:3059: result: ranlib
configure:3087: checking build system type
configure:3101: result: x86_64-pc-linux-gnu
configure:3121: checking host system type
configure:3134: result: x86_64-pc-linux-gnu
configure:3213: checking for style of include used by make
configure:3241: result: GNU
configure:3267: checking whether to compile using MPI
configure:3274: result: yes
configure:3330: checking for mpicc
configure:3346: found /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/bin/mpicc
configure:3357: result: mpicc
configure:3431: checking for gcc
configure:3458: result: mpicc
configure:3687: checking for C compiler version
configure:3696: mpicc --version >&5
gcc (GCC) 10.3.0 20210408 (Cray Inc.)
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3707: $? = 0
configure:3696: mpicc -v >&5
mpicc for MPICH version 8.1.23
Using built-in specs.
COLLECT_GCC=/opt/cray/pe/gcc/10.3.0/bin/../snos/bin/gcc
COLLECT_LTO_WRAPPER=/opt/cray/pe/gcc/10.3.0/snos/libexec/gcc/x86_64-suse-linux/10.3.0/lto-wrapper
Target: x86_64-suse-linux
Configured with: ../cpe-gcc-10.3.0-202104220029.0777bcc28ac1d/configure --prefix=/opt/cray/pe/gcc/10.3.0/snos --disable-nls --libdir=/opt/cray/pe/gcc/10.3.0/snos/lib --enable-languages=c,c++,fortran --with-gxx-include-dir=/opt/cray/pe/gcc/10.3.0/snos/include/g++ --with-slibdir=/opt/cray/pe/gcc/10.3.0/snos/lib --with-system-zlib --enable-shared --enable-__cxa_atexit --build=x86_64-suse-linux --with-ppl --with-cloog --disable-multilib
Thread model: posix
Supported LTO compression algorithms: zlib
gcc version 10.3.0 20210408 (Cray Inc.) (GCC) 
configure:3707: $? = 0
configure:3696: mpicc -V >&5
gcc: error: unrecognized command-line option '-V'
configure:3707: $? = 1
configure:3696: mpicc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
configure:3707: $? = 1
configure:3727: checking whether the C compiler works
configure:3749: mpicc    conftest.c  >&5
/usr/bin/ld: warning: libfabric.so.1, needed by /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_version@FABRIC_1.0'
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_dupinfo@FABRIC_1.3'
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_strerror@FABRIC_1.0'
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_freeinfo@FABRIC_1.3'
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_fabric@FABRIC_1.1'
/usr/bin/ld: /opt/cray/pe/mpich/8.1.23/ofi/gnu/9.1/lib/libmpi_gnu_91.so: undefined reference to `fi_getinfo@FABRIC_1.3'
collect2: error: ld returned 1 exit status
configure:3753: $? = 1
configure:3791: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "UCVM"
| #define PACKAGE_TARNAME "ucvm"
| #define PACKAGE_VERSION "22.7.0"
| #define PACKAGE_STRING "UCVM 22.7.0"
| #define PACKAGE_BUGREPORT "software@scec.org"
| #define PACKAGE_URL ""
| #define PACKAGE "ucvm"
| #define VERSION "22.7.0"
| /* end confdefs.h.  */
| 
| int
| main ()
| {
| 
|   ;
|   return 0;
| }
configure:3796: error: in `/lustre/orion/geo156/scratch/dean316/build_UCVM/UCVM':
configure:3798: error: C compiler cannot create executables
See `config.log' for more details

Problem that we are seeing on Frontier.   This is the work around,

cat -10  config.log > r

edit r to just have the configure command call

./r   to run the command by hand

make
make install

and

./ucvm_setup.py -a -r -d -p YOUR_UCVM_INSTALL_PATH 

check if 

/conf  directory has ucvm_env.sh

Related Entries

Retrieved from "https://strike.scec.org/scecwiki/index.php?title=UCVM_on_Frontier&oldid=28562"