Difference between revisions of "Cvmbycols"

From SCECpedia
Jump to navigationJump to search
 
(47 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
= Overview =
 
= Overview =
  
−
Cvmbycols is a set of codes for producing compacted Etrees for geographic regions with material properties drawn from a community velocity model. Serial and MPI versions of the program are provided.
+
Cvmbycols is a set of codes for producing compacted Etrees containing 3D geographic regions with material properties drawn from a community velocity model. Serial and MPI versions of the program are provided. The tool makes use of several existing software packages, including:
 +
* CMU Euclid Etree Library, available from http://www.cs.cmu.edu/~euclid/
 +
* Unified California Velocity Model, available from [[UCVM]]
 +
* Community Velocity Models, including one or more of these:
 +
** CVM-H, available from [[CVM-H]]
 +
** CVM-S, available from [[CVM-S]]
 +
** USGS CenCal, available from http://earthquake.usgs.gov/regional/nca/3Dgeologic/
 +
 
 +
 
 +
This SCEC version of cvmbycols is based on an older version originally developed by Tiankai Tu and Ricardo Taborda from the Quake Group at CMU.
 +
 
 +
 
 +
= Etree Summary =
 +
 
 +
In order to understand how cvmbycols works, some knowledge of the Etree data structure is required. The fundamental unit of measure in an Etree is the tick. This is a distance expressed in meters, and is derived from the length of the longest side of the geographic region:
 +
<pre>
 +
tick size = (max(len x, len y, len z) / 2^31) m
 +
</pre>
 +
In essence, the geographic region is divided up into a set of 2^31 ticks.
 +
 
 +
The funamental unit of data in an Etree is the octant. An octant contains an address (location code) and a payload (material properties). Octants are organized into a tree structure called an octree, where each node has up to eight children. Each level in this octree represents an octant size (alternatively: edge size, or resolution). Moving from level N to level N+1 in the octree increases resolution by 2x. Moving from level N to level N-1 reduces resolution by 2x. The resolution for a level can be determined with:
 +
 
 +
<pre>
 +
res from level N = (max_len / 2^N) m
 +
</pre>
 +
 
 +
 
 +
The number of ticks in an octant of level N is:
 +
 
 +
<pre>
 +
ticks for level N = 2^N
 +
</pre>
 +
 
 +
 
 +
And thus the octant size in level N is:
 +
 
 +
<pre>
 +
octant size = (2^N * (max(len x, len y, len z) / 2^31)) m
 +
</pre>
 +
 
 +
 
 +
Given a particular resolution, the appropriate level to represent it in the etree can be determined with:
 +
 
 +
<pre>
 +
level N from res = (int)(log(max_len/res)/log(2)) + 1  (rounded up to next integer)
 +
</pre>
 +
 
 +
 
 +
These relations are important in understanding the algorithm described in the following sections.
 +
 
  
 
= Algorithm Description =
 
= Algorithm Description =
  
−
== Optimized Etree Layering to Support Freq, PPWL, and Min Vs ==
+
This program uses several algorithmic approaches to increase extraction speed and minimize the amount of disk space required to store the Etree. These are described in the following sections.
−
* Divide region in set of x,y columns, where the length of each column equals its width
+
 
−
* Starting at depth = 0m, extract a 2D grid for the column at the resolution needed to support the max frequency, pounts/wavelength, and minimum Vs.
+
 
−
** If the minimum Vs is in this 2D grid allows for a lower resolution, and the current z value is divisible by the lower resolution, requery the CVM at the lower resolution. Otherwise, if the min Vs in this grid needs a higher resolution, increase the resolution to what is required (up to the maximum resolution dictated by the configured supported minimum Vs) and requery the CVM.
+
== Gridding of Geographic Coordinates ==
−
** Write this layer to an Etree (either a final etree or an etree local to this core)
+
 
−
** Step the depth down by the resolution of this 2D grid and return loop.
+
Gridding of the geographic bounding box is performed using bilinear interpolation of the four corners specified in the configuration file. No map projection is used. Grid points are located at cell center.
 +
 
 +
 
 +
== Optimized Etree Resolution Based on Frequency, PPWL, and Minimum Vs ==
 +
 
 +
One of the strengths of the Etree (octree) representation is that resolution can be adjusted so that a particular region is sampled at a lower/higher interval than surrounding areas. You are able to achieve high resolution in just those places where it is needed, and the rest of the region can be sampled at a much lower rez thereby saving considerable disk space.
 +
 
 +
With this flexibility comes the difficulty of determining what resolution is needed at all points within a meshing region to support Computational Seismology simulations. Cvmbycols uses an algorithm to deduce this resolution based off of three input parameters: maximum frequency to support, the number of points per wavelength that is desired, and the minimum Vs to support. The following relation is used to derive the resolution for a region:
 +
 
 +
<pre>
 +
res = vs_min / (ppwl * max_freq)
 +
 
 +
where:
 +
res: resolution for the region with vs_min, in meters
 +
vs_min: Minimum Vs found in region, in meters/sec
 +
ppwl: desired points per wavelength
 +
max_freq: maximum frequency to support, in Hz
 +
</pre>
 +
 
 +
 
 +
Using the above relation, the 3D space is decomposed into small columns, and the resolution in each column is tailored to the vs values found at each depth. The algorithm can be summarized as follows:
 +
* Divide region in set of x,y columns, where the length of each column equals its width.
 +
* For each column:
 +
** Starting at depth = 0m, extract a 2D grid for the column at the resolution needed to support the max frequency, pounts/wavelength, and minimum Vs, with a depth that is one-half the current octant edge size (that is, Z axis is cell center as well).
 +
*** If the local minimum Vs is in this 2D grid allows for a lower resolution, and the current z value is divisible by the lower resolution, requery the CVM at the lower resolution. Otherwise, if the local min Vs in this grid needs a higher resolution, increase the resolution to what is required (up to the maximum resolution dictated by the configured global minimum Vs) and requery the CVM.
 +
*** Write this layer to a flat file (a single file when run serially, or a file local to this core when run in parallel)
 +
*** Step the depth down by the resolution of this 2D grid and loop to the next layer in the column.
 +
** Loop to the next column
 +
 
 +
 
 +
The cvmbycols software enforces a minimum and maximum resolution for octants. Given a certain set of input parameters, these resolutions can be derived as follows:
 +
<pre>
 +
If vs_min = 200 m/s, max_freq = 4.0 Hz, and ppwl = 8, max_dim_length = 180000.0 m, max_cellsize = 500.0 m, then
 +
 
 +
Maximum Resolution:
 +
res = 200.0 / (8.0 * 4.0) = 6.25 m  (minimum resolution needed to support Vs=200 m/s)
 +
N = (log(180000.0/6.25)/log(2)) + 1 = 15
 +
max_res = 180000.0 / 2^15 ticks ~= 5.49 m
 +
 
 +
Therefore, maximum resolution (minimum edge size) for these parameters is 5.49 m.
 +
 
 +
Minimum Resolution:
 +
res = 500.0 m  (the maximum cell size to support)
 +
N = (log(180000.0/500.0)/log(2)) + 1 = 9
 +
min_res = 180000.0 / 2^9 ticks ~= 351.56 m
 +
 
 +
Therefore, minimum resolution (maximum edge size) for these parameters is 351.56 m.
 +
</pre>
 +
* Minimum resolution represents a floor on the possible resolution of an etree. This is protection against very large octants from being formed by high Vs values.
 +
 
 +
 
 +
== High-performance Etree merging and compaction ==
 +
 
 +
Generation of an Etree in a parallel environment is challenging since the Euclid etree interface only allows serial write access to the etree file. Points may only be inserted, or they may be appended in key order, by a single writer. This makes etee construction and compaction time consuming. To circumvent this issue, a high performance etree merge/compaction algorithm has been developed.
 +
 
 +
Simply put, it is essentially a merge sort performed on 2^N small flat files that contain all of the points needed for the final etree. The flat files contain material properties previously extracted from UCVM. This extraction may be done serially or in parallel as described in the sections below. Once these small, local flat files exist on disk, an MPI job of 2^N cores is then able to sort these octants by their keys in O(n*log n) time. Once all the octants are sorted, a single core may then open the final etree/flat file for writing in append mode, and simply stream the sorted octants to disk efficiently.
 +
 
 +
Conceptually, the cores in this 2^N MPI job are organized into a tree-like structure with each node containing two children. The bottom layer of this tree has nodes that each do a pre-order traversal on two flat files. They sort the combined octants read from each etree in pre-order, and then pass them up to a parent node. The nodes from the top layer to the second to bottom layer each receive locally sorted lists of octants from their two children and once again sort the combined list of octants in pre-order. This newly sorted list is passed upward in this manner until the root node of the tree receives two locally sorted halves of the entire set of etree points. It then sorts them, and appends the fully sorted stream of octants to the final file.
  
  
 
= Programs =
 
= Programs =
 +
 +
The package provides a number of programs and utilities. The Cvmbycols etree creator is described below:
 +
  
 
== Cvmbycols Serial ==
 
== Cvmbycols Serial ==
  
−
Divides etree region into columns, then extracts each column from the underlying CVM and inserts the octants into the final Etree.
+
This program runs as a single-core command-line application. It works by dividing the etree region into columns, then extracts each column from the underlying CVM and inserts the octants into the final Etree.
  
  
 
== Cvmbycols MPI ==
 
== Cvmbycols MPI ==
  
−
There are two main steps.
+
This program is actually three separate MPI programs. One program performs a parallel extraction from UCVM and saves the octants in set of files, the second locally sorts the octants in each file, and the last performs a merge to form the final etree. These are very high performance applications, capable of generating large etrees.
 +
 
 +
 
 +
=== Cvmbycols-extract-MPI ===
 +
 
 +
Divides the etree region into C columns for extraction. This is an embarrassingly parallel operation. A dispatcher (rank 0) farms out each column to a worker in a pool of N cores for extraction. Each worker queries UCVM for the points in its column and writes a flat-file formatted etree. After program execution, there are N sub-etree files, each locally unsorted. The extractor must be run on 2^Y + 1 cores where Y>0 and (2^Y) < C. The output flat file format is a list of octants(24 byte addr, 16 byte key, 12 byte payload) in arbitrary Z-order.
 +
 
 +
Since the number of points in a column depends on the minimum Vs values within that column, some columns will have high octant counts and others will have very low octant counts. Having sub-etrees that vary greatly in size is not optimal for the sorting operations that follow, so cvmbycols-extract-MPI implements a simple octant balancing mechanism. When a worker has extracted more than X octants (the default 16M octants), it reports to the dispatcher that it cannot extract any more columns and terminates. This strategy approximately balances the sub-etrees so that they may be loaded into memory by cvmbycols-sort-MPI. In the case of very large extractions where the dispatcher reports that all workers have reported they are full yet columns remain to be extracted, increase the job size by a factor of 2 until there is room for all the columns.
 +
 
 +
 
 +
=== Cvmbycols-sort-MPI ===
 +
 
 +
Sorts the sub-etrees produced by cvmbycols-extract-MPI so that each file is in local pre-order (Z-order). Again, the is an embarrassingly parallel operation. Each rank in the job reads in one of the sub-etrees produced by the previous program, sorts the octants in Z-order, and writes the sorted octants to a new sub-etree. The sorter must be run on 2^Y cores where Y>0. The worker pool must be large enough to allow each worker to load all the octants from its assigned file into memory. By default, this octant limit is 20M octants. If a rank reports that the size of the sub-etree exceeds memory capacity, the 20M buffer size constant may be increased if memory allows, or alternatively, cvmbycols-extract-MPI may be rerun with a larger job size to reduce the number of octants per file.
 +
 
 +
 
 +
=== Cvmbycols-merge-MPI ===
  
−
Extraction: Division of the etree region into X columns for extraction. This is an embarrassingly parallel operation. A dispatcher (rank 0) farms out each column to a worker in a pool of N cores for extraction. Each worker writes its own local etree. After program execution, there are N small etrees. The extractor must be run on 2^N + 1 cores.
+
Merges N locally sorted etrees in flat file format into a final, compacted etree. This is essentially a merge sort on the keys from the addresses read from the local files. The cores at the lowest level of the merge tree each read in octants from two flat files in pre-order, merge sort the two sets of addresses, then pass the locally sorted list of addresses to a parent node for additional merging. This proceeds until the points rise to rank 1 which has a completely sorted list of etree addresses. Rank 0 takes this sorted list and performs a transactional append on the final Etree. The merger must be run on 2^N cores.
  
−
Merging: Merging of the N small etrees into the final Etree. This is essentially a merge sort on the keys from the Etree addresses extracted
+
The program reads in input files that are in flat file format. In can output a merged Etree in either Etree format or flat file format. Although, due to space considerations, it strips the output flat file format to a pre-order list ot octants(16 byte key, 12 byte payload). The missing addr field is redundant and can be regenerated from the key field.  
−
from the local etrees. The cores at the lowest level of the merge tree each read in octants from two etrees with a pre-order traversal, merge sort the addresses, then pass the locally sorted list of addresses to a parent node for additional merging. This proceeds until the points rise to rank 1 which has a completely sorted list of etree addresses. Rank 0 takes this sorted list and performs a transactional append on the final etree.
 
  
−
Merging is a very fast opertion. Speeds in excess of 3M points/sec have been achieved on NICS Kraken.
 
  
 +
=== ff2etree ===
  
−
= Defining properties of an Etree =
+
This utility is used to convert the flat file produced by Cvmbycols in flat file mode into Etree format.
  
−
The following properties are defined:
+
 
 +
== ecoalesce ==
 +
 
 +
This utility optimizes an Etree be coalescing sequences of adjacent octants into single octants of a higher level when a set of comparison criteria is met. This serves to reduce the size of the Etree at the cost of resolution. Currently, ecoalesce is setup to combine eight adjacent octants when:
 +
 
 +
<pre>
 +
Vp is equal
 +
Vs is equal
 +
Density is equal
 +
</pre>
 +
 
 +
Execute the utility with:
 +
 
 +
<pre>
 +
% ecoalesce etree.in etree.out
 +
</pre>
 +
 
 +
 
 +
= Defining properties of a CVM Etree =
 +
 
 +
The following properties are needed in order to produce a CVM Etree:
  
 
* Bounding box of geographic region in lon,lat coordinates
 
* Bounding box of geographic region in lon,lat coordinates
Line 43: Line 186:
 
* Minimum Vs to support
 
* Minimum Vs to support
 
* Maximum octant size to allow
 
* Maximum octant size to allow
−
* Name of the output etree file
+
* Name of the output etree file and its format (Etree or flat files are supported)
 
* CVM to use for material properties (from UCVM)
 
* CVM to use for material properties (from UCVM)
  
  
 
= User Guide =
 
= User Guide =
 +
 +
 +
== Memory Considerations ==
 +
 +
* cvmbycols_extract_MPI: Requires 400MB per core for CVM-S extractions, 1500MB per core for CVM-H
 +
* cvmbycols_sort_MPI: Requires 1200MB per core (FLATFILE_MAX_OCTANTS constant in cvmbycols_sort_MPI.c)
 +
* cvmbycols_merge_MPI: Requires 500MB per core (CBC_OCTBUF_WRITE_SIZE, CBC_OCTBUF_READ_SIZE in cvmbycols_merge_MPI.c)
 +
 +
 +
== Configuring Cvmbycols ==
 +
 +
An example configuration file follows:
 +
 +
<pre>
 +
# Domain corners coordinates (degrees):
 +
proj=geo-bilinear
 +
lon_0=-119.288842
 +
lat_0=34.120549
 +
 +
lon_1=-118.354016
 +
lat_1=35.061096
 +
 +
lon_2=-117.780976
 +
lat_2=33.096503
 +
 +
lon_3=-116.846030
 +
lat_3=34.025873
 +
 +
# Domain dimensions (meters):
 +
x-size=180000.0000
 +
y-size=135000.0000
 +
z-size=61875.0000
 +
 +
# Blocks partition parameters:
 +
nx=256
 +
ny=192
 +
 +
# Max freq, points per wavelength
 +
max_freq=4.0
 +
ppwl=8.0
 +
 +
# Etree min/max resolution as power of 2
 +
max_cellsize=500.0
 +
 +
# Etree parameters and info
 +
title=ChinoHills4Hz8ppwl200ms
 +
author=P_Small_and_R_Taborda
 +
date=03/2011
 +
outputfile=/lustre/scratch/patricks/cvmbycols/trunk/src/cvmbycols/etree_cvmh_chino_4hz_200ms.e
 +
format=etree
 +
 +
# CVM to use
 +
#cvm=cvms
 +
cvm=cvmh
 +
ucvmconf=../../conf/kraken/ucvm.conf
 +
 +
# Min Vs, Vp
 +
vs_min=200.0
 +
 +
# Scratch dir
 +
scratch=/lustre/scratch/patricks/tmp
 +
</pre>
 +
 +
 +
== Running Cvmbycols MPI ==
 +
 +
The following PBS script for NICS Kraken illustrates how cvmbycols may be submitted to the batch scheduler:
 +
 +
<pre>
 +
#!/bin/sh
 +
#PBS -q medium
 +
#PBS -l size=1548
 +
#PBS -l walltime=08:00:00
 +
#PBS -o /lustre/scratch/${USER}/cvmbycols/trunk/pbs/kraken/chino_cvmh_4hz_200ms.out
 +
#PBS -e /lustre/scratch/${USER}/cvmbycols/trunk/pbs/kraken/chino_cvmh_4hz_200ms.err
 +
#PBS -V
 +
 +
HOME_DIR=/lustre/scratch/${USER}/cvmbycols/trunk/src/cvmbycols
 +
 +
cd ${HOME_DIR}
 +
 +
echo "Starting jobs"
 +
date
 +
 +
aprun -n 1025 -S 4 ./cvmbycols-extract-MPI -f ../../conf/kraken/chino_cvmh_4hz_200ms.conf
 +
 +
aprun -n 1024 -S 4 ./cvmbycols-sort-MPI -f ../../conf/kraken/chino_cvmh_4hz_200ms.conf
 +
 +
aprun -n 1024 -S 4 ./cvmbycols-merge-MPI -f ../../conf/kraken/chino_cvmh_4hz_200ms.conf
 +
 +
echo "Jobs done"
 +
date
 +
exit 0
 +
</pre>
 +
 +
Note that one additional core is needed as a dispatcher for the extractor.
 +
 +
 +
== Technical Note for Lustre Filesystems ==
 +
 +
Special consideration must be made when running these codes on a high-performance filesystem such as Lustre.
 +
* Update all Etree *.h/*.c files to include (#include "iobuf.h") following all stdio.h includes. Or apply the patch given below.
 +
* Execute: module add iobuf
 +
* Set compiler flag USE_IOBUF_MACROS in Etree Makefile
 +
* Recompile Euclide Etree
 +
* Recompile cvmbycols
 +
* Set IOBUF_PARAMS environment variable:
 +
<pre>
 +
IOBUF_PARAMS='*:count=2:size=64M:verbose';export IOBUF_PARAMS;
 +
</pre>
 +
 +
* Problems persists with writing many (1-2K cores) Etrees at once on a Lustre filesystem.
 +
 +
=== iobuf.h C header file ===
 +
 +
<pre>
 +
#ifndef IOBUF_H
 +
#define IOBUF_H
 +
 +
/*
 +
* iobuf - I/O buffering layer.
 +
* Copyright 2006 Cray Inc.  All rights reserved.
 +
*/
 +
 +
#if defined(USE_IOBUF_MACROS)
 +
#define lseek(f,o,w) iobuf_lseek(f,o,w)
 +
#define read(f,b,c) iobuf_read(f,b,c)
 +
#define write(f,b,c) iobuf_write(f,b,c)
 +
#define pread(f,b,c,o) iobuf_pread(f,b,c,o)
 +
#define pwrite(f,b,c,o) iobuf_pwrite(f,b,c,o)
 +
#define readv(f,v,c) iobuf_readv(f,v,c)
 +
#define writev(f,v,c) iobuf_writev(f,v,c)
 +
#define open iobuf_open
 +
#define creat(p,m) iobuf_creat(p,m)
 +
#define close(f) iobuf_close(f)
 +
#define ftruncate(f,l) iobuf_ftruncate(f,l)
 +
#define dup(f) iobuf_dup(f)
 +
#define dup2(o,n) iobuf_dup2(o,n)
 +
#define fsync(f) iobuf_fsync(f)
 +
#define fdatasync(f) iobuf_fdatasync(f)
 +
#define lseek64(f,o,w) iobuf_lseek(f,o,w)
 +
#define ftruncate64(f,l) iobuf_ftruncate(f,l)
 +
#define pread64(f,b,c,o) iobuf_pread(f,b,c,o)
 +
#define pwrite64(f,b,c,o) iobuf_pwrite(f,b,c,o)
 +
#endif
 +
 +
#ifdef __cplusplus
 +
extern "C" {
 +
#endif
 +
 +
#include <sys/types.h>
 +
struct iovec;
 +
 +
/* Replacements for system call namesakes. */
 +
extern off_t  iobuf_lseek(int fd, off_t offset, int whence);
 +
extern ssize_t iobuf_read(int fd, void *buf, size_t count);
 +
extern ssize_t iobuf_write(int fd, const void *buf, size_t count);
 +
extern ssize_t iobuf_readv(int fd, const struct iovec *vector, int count);
 +
extern ssize_t iobuf_writev(int fd, const struct iovec *vector, int count);
 +
extern ssize_t iobuf_pread(int fd, void *buf, size_t count, off_t offset);
 +
extern ssize_t iobuf_pwrite(int fd, const void *buf, size_t count, off_t offset);
 +
extern int    iobuf_open(const char *pathname, int flags, ... );
 +
extern int    iobuf_creat(const char *pathname, mode_t mode);
 +
extern int    iobuf_close(int fd);
 +
extern int    iobuf_ftruncate(int fd, off_t length);
 +
extern int    iobuf_dup(int oldfd);
 +
extern int    iobuf_dup2(int oldfd, int newfd);
 +
extern int    iobuf_fsync(int fd);
 +
extern int    iobuf_fdatasync(int fd);
 +
 +
/* Flush dirty buffers to disk. */
 +
extern int iobuf_flush(int fd);
 +
 +
/* Augment IOBUF_PARAMS with a file name pattern and parameters string. */
 +
extern int iobuf_file_params(const char *fname, const char *params);
 +
 +
#ifdef __cplusplus
 +
}
 +
#endif
 +
 +
#endif
 +
</pre>
 +
 +
 +
=== IOBUF Etree Patch ===
 +
 +
<pre>
 +
Index: euclid3/libsrc/buffer.c
 +
===================================================================
 +
RCS file: /afs/cs.cmu.edu/project/euclid/CVSROOT/euclid3/libsrc/buffer.c,v
 +
retrieving revision 1.12
 +
diff -u -r1.12 buffer.c
 +
--- euclid3/libsrc/buffer.c 2 Dec 2003 22:24:32 -0000 1.12
 +
+++ euclid3/libsrc/buffer.c 18 Mar 2011 07:12:49 -0000
 +
@@ -24,6 +24,51 @@
 +
 +
#include "buffer.h"
 +
 +
+/* use IOBUF library on Cray XT3/5 platforms */
 +
+#ifdef USE_IOBUF
 +
+#undef lseek
 +
+#undef read
 +
+#undef write
 +
+#undef readv
 +
+#undef writev
 +
+#undef pread
 +
+#undef pwrite
 +
+#undef open
 +
+#undef creat
 +
+#undef close
 +
+#undef ftruncate
 +
+#undef dup
 +
+#undef dup2
 +
+#undef fsync
 +
+#undef fdatasync
 +
+
 +
+#if !defined USE_IOBUF_LOCAL_MACROS
 +
+
 +
+#define USE_IOBUF_MACROS
 +
+#include <iobuf.h>
 +
+
 +
+#else /* !defined USE_IOBUF_LOCAL_MACROS */
 +
+
 +
+#define lseek    iobuf_lseek
 +
+#define read      iobuf_read
 +
+#define write    iobuf_write
 +
+#define readv    iobuf_readv
 +
+#define writev    iobuf_writev
 +
+#define pread    iobuf_pread
 +
+#define pwrite    iobuf_pwrite
 +
+#define open      iobuf_open
 +
+#define creat    iobuf_creat
 +
+#define close    iobuf_close
 +
+#define ftruncate iobuf_ftruncate
 +
+#define dup      iobuf_dup
 +
+#define dup2      iobuf_dup2
 +
+#define fsync    iobuf_fsync
 +
+#define fdatasync iobuf_fdatasync
 +
+#endif /* !defined USE_IOBUF_LOCAL_MACROS */
 +
+
 +
+#endif /* USE_IOBUF */
 +
+
 +
+
 +
/* various offsets for quick pointer manipulation */
 +
static int lruln_offset, hashln_offset;
 +
</pre>
  
  
Line 62: Line 451:
 
* USGS Cencal (which itself is an etree)
 
* USGS Cencal (which itself is an etree)
 
* 1D
 
* 1D
 +
 +
 +
= References =
 +
 +
#'''Ricardo Taborda, Julio Lopez, David O'Hallaron, Tiankai Tu and Jacobo Bielak (2007)''': A review of the current approach to CVM-Etrees", SCEC Annual Meeting, Palm Springs, CA, USA, September 8–12 [http://www.ce.cmu.edu/~rtaborda/publications/html/abstract_2007b.html (Abstract and poster)].
 +
#'''Tiankai Tu, David R. O'Hallaron, and Julio Lopez (2003)''': The Etree Library: A System for Manipulating Large Octrees on Disk. Technical Report CMU-CS-03-174, School of Computer Science, Carnegie Mellon University, July, 2003. ( ps, pdf, ppt, bib ).
 +
#'''Tiankai Tu, David R. O'Hallaron, and Julio Lopez (2002)''': Etree: A Database-Oriented Method for Generating Large Octree Meshes. In Proceedings of the Eleventh International Meshing Roundtable (Ithaca, NY, Sept. 2002), pp. 127-138. ( ps, pdf, ppt, bib )
 +
#'''David R. O'Hallaron (2003)''': Database Methods for Scientific Computing, Northwestern University, Feb, 2003. This is an overview of the Euclid project. ( ppt, MPEG animation on title slide )

Latest revision as of 17:35, 29 March 2011

Overview

Cvmbycols is a set of codes for producing compacted Etrees containing 3D geographic regions with material properties drawn from a community velocity model. Serial and MPI versions of the program are provided. The tool makes use of several existing software packages, including:


This SCEC version of cvmbycols is based on an older version originally developed by Tiankai Tu and Ricardo Taborda from the Quake Group at CMU.


Etree Summary

In order to understand how cvmbycols works, some knowledge of the Etree data structure is required. The fundamental unit of measure in an Etree is the tick. This is a distance expressed in meters, and is derived from the length of the longest side of the geographic region: 

tick size = (max(len x, len y, len z) / 2^31) m

In essence, the geographic region is divided up into a set of 2^31 ticks.

The funamental unit of data in an Etree is the octant. An octant contains an address (location code) and a payload (material properties). Octants are organized into a tree structure called an octree, where each node has up to eight children. Each level in this octree represents an octant size (alternatively: edge size, or resolution). Moving from level N to level N+1 in the octree increases resolution by 2x. Moving from level N to level N-1 reduces resolution by 2x. The resolution for a level can be determined with: 

res from level N = (max_len / 2^N) m


The number of ticks in an octant of level N is: 

ticks for level N = 2^N


And thus the octant size in level N is: 

octant size = (2^N * (max(len x, len y, len z) / 2^31)) m


Given a particular resolution, the appropriate level to represent it in the etree can be determined with: 

level N from res = (int)(log(max_len/res)/log(2)) + 1   (rounded up to next integer)


These relations are important in understanding the algorithm described in the following sections.


Algorithm Description

This program uses several algorithmic approaches to increase extraction speed and minimize the amount of disk space required to store the Etree. These are described in the following sections.


Gridding of Geographic Coordinates

Gridding of the geographic bounding box is performed using bilinear interpolation of the four corners specified in the configuration file. No map projection is used. Grid points are located at cell center.


Optimized Etree Resolution Based on Frequency, PPWL, and Minimum Vs

One of the strengths of the Etree (octree) representation is that resolution can be adjusted so that a particular region is sampled at a lower/higher interval than surrounding areas. You are able to achieve high resolution in just those places where it is needed, and the rest of the region can be sampled at a much lower rez thereby saving considerable disk space.

With this flexibility comes the difficulty of determining what resolution is needed at all points within a meshing region to support Computational Seismology simulations. Cvmbycols uses an algorithm to deduce this resolution based off of three input parameters: maximum frequency to support, the number of points per wavelength that is desired, and the minimum Vs to support. The following relation is used to derive the resolution for a region: 

res = vs_min / (ppwl * max_freq)

where:
 res: resolution for the region with vs_min, in meters
 vs_min: Minimum Vs found in region, in meters/sec
 ppwl: desired points per wavelength
 max_freq: maximum frequency to support, in Hz


Using the above relation, the 3D space is decomposed into small columns, and the resolution in each column is tailored to the vs values found at each depth. The algorithm can be summarized as follows:

  • Divide region in set of x,y columns, where the length of each column equals its width.
  • For each column:
    • Starting at depth = 0m, extract a 2D grid for the column at the resolution needed to support the max frequency, pounts/wavelength, and minimum Vs, with a depth that is one-half the current octant edge size (that is, Z axis is cell center as well).
      • If the local minimum Vs is in this 2D grid allows for a lower resolution, and the current z value is divisible by the lower resolution, requery the CVM at the lower resolution. Otherwise, if the local min Vs in this grid needs a higher resolution, increase the resolution to what is required (up to the maximum resolution dictated by the configured global minimum Vs) and requery the CVM.
      • Write this layer to a flat file (a single file when run serially, or a file local to this core when run in parallel)
      • Step the depth down by the resolution of this 2D grid and loop to the next layer in the column.
    • Loop to the next column


The cvmbycols software enforces a minimum and maximum resolution for octants. Given a certain set of input parameters, these resolutions can be derived as follows: 

If vs_min = 200 m/s, max_freq = 4.0 Hz, and ppwl = 8, max_dim_length = 180000.0 m, max_cellsize = 500.0 m, then

Maximum Resolution:
res = 200.0 / (8.0 * 4.0) = 6.25 m  (minimum resolution needed to support Vs=200 m/s)
N = (log(180000.0/6.25)/log(2)) + 1 = 15
max_res = 180000.0 / 2^15 ticks ~= 5.49 m

Therefore, maximum resolution (minimum edge size) for these parameters is 5.49 m.

Minimum Resolution:
res = 500.0 m  (the maximum cell size to support)
N = (log(180000.0/500.0)/log(2)) + 1 = 9
min_res = 180000.0 / 2^9 ticks ~= 351.56 m

Therefore, minimum resolution (maximum edge size) for these parameters is 351.56 m.
  • Minimum resolution represents a floor on the possible resolution of an etree. This is protection against very large octants from being formed by high Vs values.


High-performance Etree merging and compaction

Generation of an Etree in a parallel environment is challenging since the Euclid etree interface only allows serial write access to the etree file. Points may only be inserted, or they may be appended in key order, by a single writer. This makes etee construction and compaction time consuming. To circumvent this issue, a high performance etree merge/compaction algorithm has been developed.

Simply put, it is essentially a merge sort performed on 2^N small flat files that contain all of the points needed for the final etree. The flat files contain material properties previously extracted from UCVM. This extraction may be done serially or in parallel as described in the sections below. Once these small, local flat files exist on disk, an MPI job of 2^N cores is then able to sort these octants by their keys in O(n*log n) time. Once all the octants are sorted, a single core may then open the final etree/flat file for writing in append mode, and simply stream the sorted octants to disk efficiently.

Conceptually, the cores in this 2^N MPI job are organized into a tree-like structure with each node containing two children. The bottom layer of this tree has nodes that each do a pre-order traversal on two flat files. They sort the combined octants read from each etree in pre-order, and then pass them up to a parent node. The nodes from the top layer to the second to bottom layer each receive locally sorted lists of octants from their two children and once again sort the combined list of octants in pre-order. This newly sorted list is passed upward in this manner until the root node of the tree receives two locally sorted halves of the entire set of etree points. It then sorts them, and appends the fully sorted stream of octants to the final file.


Programs

The package provides a number of programs and utilities. The Cvmbycols etree creator is described below:


Cvmbycols Serial

This program runs as a single-core command-line application. It works by dividing the etree region into columns, then extracts each column from the underlying CVM and inserts the octants into the final Etree.


Cvmbycols MPI

This program is actually three separate MPI programs. One program performs a parallel extraction from UCVM and saves the octants in set of files, the second locally sorts the octants in each file, and the last performs a merge to form the final etree. These are very high performance applications, capable of generating large etrees.


Cvmbycols-extract-MPI

Divides the etree region into C columns for extraction. This is an embarrassingly parallel operation. A dispatcher (rank 0) farms out each column to a worker in a pool of N cores for extraction. Each worker queries UCVM for the points in its column and writes a flat-file formatted etree. After program execution, there are N sub-etree files, each locally unsorted. The extractor must be run on 2^Y + 1 cores where Y>0 and (2^Y) < C. The output flat file format is a list of octants(24 byte addr, 16 byte key, 12 byte payload) in arbitrary Z-order.

Since the number of points in a column depends on the minimum Vs values within that column, some columns will have high octant counts and others will have very low octant counts. Having sub-etrees that vary greatly in size is not optimal for the sorting operations that follow, so cvmbycols-extract-MPI implements a simple octant balancing mechanism. When a worker has extracted more than X octants (the default 16M octants), it reports to the dispatcher that it cannot extract any more columns and terminates. This strategy approximately balances the sub-etrees so that they may be loaded into memory by cvmbycols-sort-MPI. In the case of very large extractions where the dispatcher reports that all workers have reported they are full yet columns remain to be extracted, increase the job size by a factor of 2 until there is room for all the columns.


Cvmbycols-sort-MPI

Sorts the sub-etrees produced by cvmbycols-extract-MPI so that each file is in local pre-order (Z-order). Again, the is an embarrassingly parallel operation. Each rank in the job reads in one of the sub-etrees produced by the previous program, sorts the octants in Z-order, and writes the sorted octants to a new sub-etree. The sorter must be run on 2^Y cores where Y>0. The worker pool must be large enough to allow each worker to load all the octants from its assigned file into memory. By default, this octant limit is 20M octants. If a rank reports that the size of the sub-etree exceeds memory capacity, the 20M buffer size constant may be increased if memory allows, or alternatively, cvmbycols-extract-MPI may be rerun with a larger job size to reduce the number of octants per file.


Cvmbycols-merge-MPI

Merges N locally sorted etrees in flat file format into a final, compacted etree. This is essentially a merge sort on the keys from the addresses read from the local files. The cores at the lowest level of the merge tree each read in octants from two flat files in pre-order, merge sort the two sets of addresses, then pass the locally sorted list of addresses to a parent node for additional merging. This proceeds until the points rise to rank 1 which has a completely sorted list of etree addresses. Rank 0 takes this sorted list and performs a transactional append on the final Etree. The merger must be run on 2^N cores.

The program reads in input files that are in flat file format. In can output a merged Etree in either Etree format or flat file format. Although, due to space considerations, it strips the output flat file format to a pre-order list ot octants(16 byte key, 12 byte payload). The missing addr field is redundant and can be regenerated from the key field.


ff2etree

This utility is used to convert the flat file produced by Cvmbycols in flat file mode into Etree format.


ecoalesce

This utility optimizes an Etree be coalescing sequences of adjacent octants into single octants of a higher level when a set of comparison criteria is met. This serves to reduce the size of the Etree at the cost of resolution. Currently, ecoalesce is setup to combine eight adjacent octants when: 

Vp is equal
Vs is equal
Density is equal

Execute the utility with: 

% ecoalesce etree.in etree.out


Defining properties of a CVM Etree

The following properties are needed in order to produce a CVM Etree:

  • Bounding box of geographic region in lon,lat coordinates
  • Extents of Etree volume in 3D, in km
  • Number of columns in x,y axis to partition 3D space. The resulting columns must be square along the x-y axis.
  • Frequency limit to support in Hz
  • Number of points per wavelength to support
  • Minimum Vs to support
  • Maximum octant size to allow
  • Name of the output etree file and its format (Etree or flat files are supported)
  • CVM to use for material properties (from UCVM)


User Guide

Memory Considerations

  • cvmbycols_extract_MPI: Requires 400MB per core for CVM-S extractions, 1500MB per core for CVM-H
  • cvmbycols_sort_MPI: Requires 1200MB per core (FLATFILE_MAX_OCTANTS constant in cvmbycols_sort_MPI.c)
  • cvmbycols_merge_MPI: Requires 500MB per core (CBC_OCTBUF_WRITE_SIZE, CBC_OCTBUF_READ_SIZE in cvmbycols_merge_MPI.c)


Configuring Cvmbycols

An example configuration file follows: 

# Domain corners coordinates (degrees):
proj=geo-bilinear
lon_0=-119.288842
lat_0=34.120549

lon_1=-118.354016
lat_1=35.061096

lon_2=-117.780976
lat_2=33.096503

lon_3=-116.846030
lat_3=34.025873

# Domain dimensions (meters):
x-size=180000.0000
y-size=135000.0000
z-size=61875.0000

# Blocks partition parameters:
nx=256
ny=192

# Max freq, points per wavelength
max_freq=4.0
ppwl=8.0

# Etree min/max resolution as power of 2
max_cellsize=500.0

# Etree parameters and info
title=ChinoHills4Hz8ppwl200ms
author=P_Small_and_R_Taborda
date=03/2011
outputfile=/lustre/scratch/patricks/cvmbycols/trunk/src/cvmbycols/etree_cvmh_chino_4hz_200ms.e
format=etree

# CVM to use
#cvm=cvms
cvm=cvmh
ucvmconf=../../conf/kraken/ucvm.conf

# Min Vs, Vp
vs_min=200.0

# Scratch dir
scratch=/lustre/scratch/patricks/tmp


Running Cvmbycols MPI

The following PBS script for NICS Kraken illustrates how cvmbycols may be submitted to the batch scheduler: 

#!/bin/sh
#PBS -q medium
#PBS -l size=1548
#PBS -l walltime=08:00:00
#PBS -o /lustre/scratch/${USER}/cvmbycols/trunk/pbs/kraken/chino_cvmh_4hz_200ms.out
#PBS -e /lustre/scratch/${USER}/cvmbycols/trunk/pbs/kraken/chino_cvmh_4hz_200ms.err
#PBS -V

HOME_DIR=/lustre/scratch/${USER}/cvmbycols/trunk/src/cvmbycols

cd ${HOME_DIR}

echo "Starting jobs"
date

aprun -n 1025 -S 4 ./cvmbycols-extract-MPI -f ../../conf/kraken/chino_cvmh_4hz_200ms.conf

aprun -n 1024 -S 4 ./cvmbycols-sort-MPI -f ../../conf/kraken/chino_cvmh_4hz_200ms.conf

aprun -n 1024 -S 4 ./cvmbycols-merge-MPI -f ../../conf/kraken/chino_cvmh_4hz_200ms.conf

echo "Jobs done"
date
exit 0

Note that one additional core is needed as a dispatcher for the extractor.


Technical Note for Lustre Filesystems

Special consideration must be made when running these codes on a high-performance filesystem such as Lustre.

  • Update all Etree *.h/*.c files to include (#include "iobuf.h") following all stdio.h includes. Or apply the patch given below.
  • Execute: module add iobuf
  • Set compiler flag USE_IOBUF_MACROS in Etree Makefile
  • Recompile Euclide Etree
  • Recompile cvmbycols
  • Set IOBUF_PARAMS environment variable:
IOBUF_PARAMS='*:count=2:size=64M:verbose';export IOBUF_PARAMS;
  • Problems persists with writing many (1-2K cores) Etrees at once on a Lustre filesystem.

iobuf.h C header file

#ifndef IOBUF_H
#define IOBUF_H

/*
 * iobuf - I/O buffering layer.
 * Copyright 2006 Cray Inc.  All rights reserved.
 */

#if defined(USE_IOBUF_MACROS)
#define lseek(f,o,w)	iobuf_lseek(f,o,w)
#define read(f,b,c)	iobuf_read(f,b,c)
#define write(f,b,c)	iobuf_write(f,b,c)
#define pread(f,b,c,o)	iobuf_pread(f,b,c,o)
#define pwrite(f,b,c,o)	iobuf_pwrite(f,b,c,o)
#define readv(f,v,c)	iobuf_readv(f,v,c)
#define writev(f,v,c)	iobuf_writev(f,v,c)
#define open		iobuf_open
#define creat(p,m)	iobuf_creat(p,m)
#define close(f)	iobuf_close(f)
#define ftruncate(f,l)	iobuf_ftruncate(f,l)
#define dup(f)		iobuf_dup(f)
#define dup2(o,n)	iobuf_dup2(o,n)
#define fsync(f)	iobuf_fsync(f)
#define fdatasync(f)	iobuf_fdatasync(f)
#define lseek64(f,o,w)		iobuf_lseek(f,o,w)
#define ftruncate64(f,l)	iobuf_ftruncate(f,l)
#define pread64(f,b,c,o)	iobuf_pread(f,b,c,o)
#define pwrite64(f,b,c,o)	iobuf_pwrite(f,b,c,o)
#endif

#ifdef	__cplusplus
extern "C" {
#endif

#include <sys/types.h>
struct iovec;

/* Replacements for system call namesakes. */
extern off_t   iobuf_lseek(int fd, off_t offset, int whence);
extern ssize_t iobuf_read(int fd, void *buf, size_t count);
extern ssize_t iobuf_write(int fd, const void *buf, size_t count);
extern ssize_t iobuf_readv(int fd, const struct iovec *vector, int count);
extern ssize_t iobuf_writev(int fd, const struct iovec *vector, int count);
extern ssize_t iobuf_pread(int fd, void *buf, size_t count, off_t offset);
extern ssize_t iobuf_pwrite(int fd, const void *buf, size_t count, off_t offset);
extern int     iobuf_open(const char *pathname, int flags, ... );
extern int     iobuf_creat(const char *pathname, mode_t mode);
extern int     iobuf_close(int fd);
extern int     iobuf_ftruncate(int fd, off_t length);
extern int     iobuf_dup(int oldfd);
extern int     iobuf_dup2(int oldfd, int newfd);
extern int     iobuf_fsync(int fd);
extern int     iobuf_fdatasync(int fd);

/* Flush dirty buffers to disk. */
extern int iobuf_flush(int fd);

/* Augment IOBUF_PARAMS with a file name pattern and parameters string. */
extern int iobuf_file_params(const char *fname, const char *params);

#ifdef	__cplusplus
}
#endif

#endif


IOBUF Etree Patch

Index: euclid3/libsrc/buffer.c
===================================================================
RCS file: /afs/cs.cmu.edu/project/euclid/CVSROOT/euclid3/libsrc/buffer.c,v
retrieving revision 1.12
diff -u -r1.12 buffer.c
--- euclid3/libsrc/buffer.c	2 Dec 2003 22:24:32 -0000	1.12
+++ euclid3/libsrc/buffer.c	18 Mar 2011 07:12:49 -0000
@@ -24,6 +24,51 @@
 
 #include "buffer.h"
 
+/* use IOBUF library on Cray XT3/5 platforms */
+#ifdef USE_IOBUF
+#undef lseek
+#undef read
+#undef write
+#undef readv
+#undef writev
+#undef pread
+#undef pwrite
+#undef open
+#undef creat
+#undef close
+#undef ftruncate
+#undef dup
+#undef dup2
+#undef fsync
+#undef fdatasync
+
+#if !defined USE_IOBUF_LOCAL_MACROS
+
+#define USE_IOBUF_MACROS
+#include <iobuf.h>
+
+#else /* !defined USE_IOBUF_LOCAL_MACROS */
+
+#define lseek     iobuf_lseek
+#define read      iobuf_read
+#define write     iobuf_write
+#define readv     iobuf_readv
+#define writev    iobuf_writev
+#define pread     iobuf_pread
+#define pwrite    iobuf_pwrite
+#define open      iobuf_open
+#define creat     iobuf_creat
+#define close     iobuf_close
+#define ftruncate iobuf_ftruncate
+#define dup       iobuf_dup
+#define dup2      iobuf_dup2
+#define fsync     iobuf_fsync
+#define fdatasync iobuf_fdatasync
+#endif /* !defined USE_IOBUF_LOCAL_MACROS */
+
+#endif /* USE_IOBUF */
+
+
 /* various offsets for quick pointer manipulation */
 static int lruln_offset, hashln_offset;


Source Code

SVN: https://source.usc.edu/svn/cvmbycols


Supported CVMs

The cvmbycols utility is built upon UCVM. As a result, it can extract etrees from the following CMV sources:

  • CVM-H
  • CVM-S
  • USGS Cencal (which itself is an etree)
  • 1D


References

  1. Ricardo Taborda, Julio Lopez, David O'Hallaron, Tiankai Tu and Jacobo Bielak (2007): A review of the current approach to CVM-Etrees", SCEC Annual Meeting, Palm Springs, CA, USA, September 8–12 (Abstract and poster).
  2. Tiankai Tu, David R. O'Hallaron, and Julio Lopez (2003): The Etree Library: A System for Manipulating Large Octrees on Disk. Technical Report CMU-CS-03-174, School of Computer Science, Carnegie Mellon University, July, 2003. ( ps, pdf, ppt, bib ).
  3. Tiankai Tu, David R. O'Hallaron, and Julio Lopez (2002): Etree: A Database-Oriented Method for Generating Large Octree Meshes. In Proceedings of the Eleventh International Meshing Roundtable (Ithaca, NY, Sept. 2002), pp. 127-138. ( ps, pdf, ppt, bib )
  4. David R. O'Hallaron (2003): Database Methods for Scientific Computing, Northwestern University, Feb, 2003. This is an overview of the Euclid project. ( ppt, MPEG animation on title slide )
Retrieved from "https://strike.scec.org/scecwiki/index.php?title=Cvmbycols&oldid=2241"